User_Manual_Taisync_V1.5.0-1(HDMI-HDMI)-EN

6
Connect this port to the Lightning port of an iPhone, or to the USB port of an android phone and
use ViULinxTM cell phone APP to watch live video play and set parameters of the air and
ground unit. Video output interface can be connected to mobile phones or tablets for video play.
QGC is also supported.
④ Serial Port (UART)
Connect this port to the telemetry port of a remote controller, or the serial port of a ground
control station to setup a telemetry link between the drone and the remote controller or the
ground control station. UART singal: LVCMOS-3.3V.
⑤ Remote Control Port (RC)
Connect this port to the training PPM/S.bus port of a remote controller. Remote controller can
use ViUlinxTM uplink to communicate with the drone. Pin V + can provide 5V power
supply.
① Charging Port
Connect this port to the supplied power adaptor to charge the battery in the ground unit.
The power supply recommended 3s battery.
② Power Button
When the ground unit is off, push this button once to turn on the ground unit. When the
ground unit is on, push this button once to turn off the ground unit.
③ Fan Ventilation Outlet
Don’t block this fan ventilation outlet to ensure effective cooling.
④ Fan Ventilation Outlet
Don’t block this fan ventilation outlet to ensure effective cooling.
①
②
③
④