User's Guide

Table Of Contents

Draft

10 General Safety and Compliance Information Transportable Mobile Repeater User’s Guide

1.4.4 Health, Safety and Electromagnetic Compatibility in Europe

In the European Community, radio and telecommunications equipment is

regulated by Directive 2014/53/EU. The requirements of this directive

include protection of health and safety of users, as well as electromagnetic

compatibility.

Intended Purpose

of Product

This product is a radio transceiver. It is intended for radio communications

in the Private Mobile Radio (PMR) or Public Access Mobile Radio

(PAMR) services, to be used in all member states of the European Union

(EU) and states within the European Economic Area (EEA). This product

can be programmed to transmit on frequencies that are not harmonized

throughout the EU/EEA, and will require a license to operate in each

member state.

Declaration of

Conformity

You can download the formal Declaration of Conformity from https://

www.taitradio.com/our-resources/compliance#European.

1.5 Device and Network Security

If this radio network equipment is used for mission-critical applications, it

is important to be able to ensure security and continuity of operation. For

IP-network-connected equipment, it is also important to ensure that this

equipment is not a means of compromising other equipment in the network.

All network elements should be physically secured, where possible. This

includes the use of locked cabinets and locked rooms. Seals on connectors

can also provide a visual indication of unauthorized tampering.

Tait recommends that all network and audio connectors should be sealed

with the stick-on type of seal. The seal should reveal if any of the

connectors have been unplugged, or if any unauthorized equipment has

been plugged in.

The seals should be difficult to remove without breaking, and should bridge

between the cable and equipment side (plug and socket) of the connection.

Seals should cover any unused network or audio sockets. This includes the

Ethernet connector on any adaptor front panels, any spare switch ports, and

the console port on the router and switch.

The seals should be difficult to reproduce. A sticker initialed or signed by

the technician should satisfy this.

Seals must be replaced if they need to be disturbed during maintenance.