Installation and Operation Manual
Table Of Contents
- Installation and Operation Manual
- Contents
- Preface
- 1 Description
- 2 General Safety and Regulatory Information
- 3 Operation
- 4 Connecting to the Base Station
- 4.1 PC Recommendations
- 4.2 Connecting Your PC to the Base Station
- 4.3 Working with the Web Interface
- 4.4 Basic Tasks
- 4.4.1 User Settings
- 4.4.2 Taking the Base Station Offline
- 4.4.3 Troubleshooting Alarms
- 4.4.4 Working with Configuration Files
- 4.4.5 Single or channel group base stations
- 4.4.6 Marshaling or transmit delay
- 4.4.7 Configuring Receive-Only Base Stations
- 4.4.8 Setting Up Custom Alarms
- 4.4.9 Uploading Firmware from the Base Station
- 4.4.10 Downloading Firmware from a Package Server
- 4.4.11 Activating New Firmware
- 4.4.12 Subaudible Signaling
- 4.4.13 SNMP Network Management
- 5 Installation
- 6 Maintenance
- 7 Troubleshooting
- Appendix A – Interface Pin Allocations
- Appendix B– Installing the Firmware Package
- Glossary
- Tait General Software License Agreement
TB7300 Installation and Operation Manual Description 17
© Tait International Limited November 2019
License Name Air Interface System Type
TBAS041 Analog Air Interface Analog Conventional
TBAS050 P25 Common Air Interface P25 Phase 1 Conventional
TBAS060 Digital Fixed Station Interface Analog & P25 Phase 1 Conventional
TBAS061 P25 AS-IP Central Voter Analog & P25 Phase 1 Conventional
TBAS071 P25 AS-IP IP Networking
Satellite
Analog & P25 Phase 1 Conventional
TBAS062 P25 AS-IP Simulcast Analog & P25 Phase 1 Conventional
TBAS301 Analog Air Interface Analog Conventional/MPT Trunked
TBAS304 DMR Conventional DMR Conventional
TBAS303 DMR Trunking Access DMR Trunked
TBAS302 DMR Trunking Express6 DMR Trunked
TBAS305 DMR Trunking Express20 DMR Trunked
TBAS300 DMR Trunking Full DMR Trunked
TBAS306 DMR Central Voter DMR Trunked/Conventional
TBAS307 DMR IP Networking Satellite DMR Trunked/Conventional