Installation and Operation Manual
Table Of Contents
- Installation and Operation Manual
- Contents
- Preface
- 1 Description
- 2 General Safety and Regulatory Information
- 3 Operation
- 4 Connecting to the Base Station
- 4.1 PC Recommendations
- 4.2 Connecting Your PC to the Base Station
- 4.3 Working with the Web Interface
- 4.4 Basic Tasks
- 4.4.1 User Settings
- 4.4.2 Taking the Base Station Offline
- 4.4.3 Troubleshooting Alarms
- 4.4.4 Working with Configuration Files
- 4.4.5 Single or channel group base stations
- 4.4.6 Marshaling or transmit delay
- 4.4.7 Configuring Receive-Only Base Stations
- 4.4.8 Setting Up Custom Alarms
- 4.4.9 Uploading Firmware from the Base Station
- 4.4.10 Downloading Firmware from a Package Server
- 4.4.11 Activating New Firmware
- 4.4.12 Subaudible Signaling
- 4.4.13 SNMP Network Management
- 5 Installation
- 6 Maintenance
- 7 Troubleshooting
- Appendix A – Interface Pin Allocations
- Appendix B– Installing the Firmware Package
- Glossary
- Tait General Software License Agreement
TB7300 Installation and Operation Manual Installation 61
© Tait International Limited November 2019
5.6.1 Mounting and Support Kits
For TB7300 mounted and support operation, Tait offers the following kits
for order:
5.7 Connecting the Base Station
This section provides information relevant to the task of connecting up the
various inputs and outputs of the base station.
5.7.1 Connection Overview
External connections are all located at the rear of the base station. See
Figure 5.4 below.
Item Number Item Description
TBD-SP-0002 TB7300 Wall
Mounting Kit
Wall-mounting option with brackets
that attach to the rear of the chassis
TBD-SP-0003 TB7300 Rear
Support Bracket Kit
Provides additional support when the
base station is mounted in a rack
Figure 5.4 Base station inputs and outputs
b
ground connector
g
RF output
c
system interface connector
h
1PPS input connector
d
Ethernet interface connector
i
-VDC input
e
RF input
j
+VDC input
f
serial RS-232 connector
1)
External reference input
b
c
d
e
f
g
h
i
j
1)