User's Guide

Table Of Contents

Transportable Base Station/Repeater User’s Guide Basic Operation 15

3.6.3 Charge

This LED is only lit when an AC supply is connected.

Set the battery select switch to EXTERNAL AC/DC when charging the

battery with AC Mains.

External DC supply will not charge the internal battery.

3.7 Antenna

The transportable base station is a 15W Repeater that requires a remote

mounted antenna with a suitable ground plane. This antenna and internal

duplexer must be tuned to the frequency of the Repeater. The transportable

base station has an N-type antenna connector.

Caution Risk of harm from RF radiation! While the Repeater is oper-

ating (transmitting), you must ensure that there is always a distance of

0.9m between people and the antenna. This is the minimum safe dis-

tance.

3.8 Mains Socket Wiring

The repeater is shipped with a Schurter waterproof AC Mains socket this

will need to be wired by an electrician or electrically registered person.

Schurter Mains Socket wiring

LED Indication Details

Status green battery is fully charged or above 20%

charged

Status red, flashing battery is low

Status off battery has been disconnected due to

low voltage

LED Indication Details

Charge red battery is being charged

Charge off battery is fully charged