Installation Instructions
Table Of Contents
- Installation and Configuration Manual
- Tait Communications Corporate Head Office
- Contents
- Preface
- 1 Introduction
- 2 Installation
- 3 Configuration
- 4 Administrating the SCADA Gateway
- 4.1 Logging on to the SCADA Gateway
- 4.2 Logging on to the SCADA Gateway as ‘root’
- 4.3 Self-Signed SSL Certificates
- 4.4 Using the Certificate from a Certification Authority (CA)
- 4.5 Changing the ‘root’ and ‘taitnet’ Passwords
- 4.6 Stopping/Starting the SCADA Gateway Software
- 4.7 Changing to a Local Time Zone
- 4.8 SCADA Gateway Resource File
- 5 Uploading SCADA Gateway Firmware
- 6 Backing up/Restoring Configuration Files
- Appendix 1: Transferring an ISO Image to a USB Flash Drive
- Appendix 2: Adding an Alternate Interface in CentOS
6 Preface SCADA Gateway Installation and Configuration Manual
© Tait Limited May 2017
Publication Record
Issue Publication Date Description
1 June 2015 First release. SCADA gateway version 1.00.
2 December 2016 Updated for SCADA gateway version 1.04
and later
■ Section 1.3 Tait TN9300 DMR Trunked
Network updated
■ Section 2.1 Before You Start updated
■ Section 2.2 Installing the SCADA
Gateway on the DMR Node Controller
updated
■ Section 2.3.1 Obtaining the Host ID for
Requesting the License File updated
■ Section 2.4 Recovering the DMR Node
updated
■ Section 2.4 Recovering the DMR Node
updated
■ Section 2.6 Creating Your Custom Web
Login Script updated
■ Section 3.1 Configuring the DMR Node
Controller updated
■ Section 3.3 Configuring a Primary SCADA
Gateway updated
■ Section 3.3.4 Setting up the SCADA
Gateway for High Availability added
■ Section 3.4 Configuring a Secondary
SCADA Gateway added
■ Section 4.4 Using the Certificate from a
Certification Authority (CA) updated
■ Section 4.6 Stopping/Starting the SCADA
Gateway Software updated
■ Section 4.8 SCADA Gateway Resource
File added
■ Section 6 Backing up/Restoring
Configuration Files updated
■ Appendix 2:Adding an Alternate Interface
in CentOS updated