Safety Instructions

Safety and compliance information 11
English
Repeaters operate by receiving a transmission on one channel and re-
transmitting it on another. Operators are required to avoid using local repeater
input channels, which will be in the range of 31 to 38, unless it is intended to use
the repeater facility, and to avoid using local repeater output channels, which
will be in the range 1 to 8, at any time.
No voice transmissions are permitted on data channels 22 and 23. Equipment
meeting this standard will inhibit voice operation on channels 22 and 23.
In Australia:
■ Except in an emergency, a CB transmitter must not be operated on UHF
channels 5 and 35.
■ Channel 11 is the customary calling channel for establishing
communications.
■ Channel 40 is the customary road vehicle channel.
Health, safety, and electromagnetic compatibility in Europe
In the European Community, radio and telecommunications equipment is
regulated by Directive 2014/53/EU. The requirements of this directive include
protection of health and safety of users, as well as electromagnetic
compatibility.
Intended purpose of product
This product is an FM radio transceiver. It is intended for radiocommunication
in the Private Mobile Radio (PMR) or Public Access Mobile Radio (PAMR)
services, to be used in all member states of the European Union (EU) and states
within the European Economic Area (EEA).
Restrictions
This product can be programmed to transmit on frequencies that are not
harmonized throughout the EU/EEA, and will require a licence to operate in
each member state.
This product can be programmed for frequencies or emissions that may make
its use illegal. Where applicable, a license must be obtained before this product
is used. All license requirements must be observed. Limitations may apply to
transmitter power, operating frequency, channel spacing, and emission.
Declaration of conformity
Brief Declarations of Conformity appear on page 3 of this document.
To download the formal declaration of conformity, go to
www.taitradio.com/eudoc.
Interference with electronic devices
Warning Some electronic devices may be prone to malfunction due to a lack
of protection from the RF energy that is present when your radio
is transmitting.
Examples of electronic devices that may be affected by RF energy are:
■ aircraft electronic systems
■ vehicular electronic systems such as fuel injection, anti-skid brakes, and
cruise control
■ medical devices such as pacemakers and hearing aids