User's Guide
Table Of Contents
- User’s Guide
- Contents
- For your safety
- Menu maps
- 1 About this guide
- 2 Getting started
- 3 Basic operation
- 4 Using the address book
- 5 Operating in conventional mode
- 6 Operating in trunked mode
- 7 Dialing calls in trunked mode
- 8 Location services
- 9 Loneworker monitoring
- 10 Encryption
- 11 Customizing radio settings
- 12 Troubleshooting
- Simplified Declaration of Conformity
- Tait Software Licence Agreement
72 Operating in conventional mode
Radio check
This feature is available for DMR digital channels only.
If you want to find out whether a particular radio is
available on the same DMR conventional channel,
you can use the radio check feature. This sends a
radio check message to the radio unit you have
specified.
1 Press Menu and select Services > Radio check.
You can also check a radio from the Options
menu of its address book entry.
2 If an address book is configured, you can select to
either dial a number or show the address book.
Otherwise a preset list of radios will appear.
3 Scroll to the radio you want to check.
4 Press Send to.
The red LED glows and a message showing the
destination appears in the display.
If the radio is available on the system, an
acknowledgement message is displayed.
Send using
Dialed number
Address book
Back Select
Radio check
Car 2
Car 3
Send toCancel
Sending
radio chk to
Car 2
Cancel
Ack received
OK