TP3300/TP3350 DMR Conventional Portable Radios User’s Guide MPE-00001-02 · Issue 2 · March 2019
User Guide Cross Reference T03-00302-BAAA/BBAA/BCAA : Analog and DMR Tier 2 portable radios are elsewhere in this manual referred to as TP3300 T03-00303-BAAA/BBAA/BCAA : Analog and DMR Tier 2 portable radios, with added GPS and BT functionality, are elsewhere in this manual referred to as TP3350
Contents For your safety..................................................................7 Menu map........................................................................19 1 About this guide .............................................................20 Safety warnings used in this guide ........................................... 20 Related documentation............................................................. 21 2 Before using your radio .................................................
Charging temperatures............................................................. Leaving the battery on charge .................................................. Receiving calls while charging.................................................. Low battery warning ................................................................. Charging a battery for the first time .......................................... Charging a battery ....................................................................
Copyright and trademarks All information contained in this document is the property of Tait International Limited. All rights reserved. This document may not, in whole or in part, be copied, photocopied, reproduced, translated, stored, or reduced to any electronic medium or machine-readable form, without prior written permission from Tait International Limited. The word TAIT and the TAIT logo are trademarks of Tait International Limited.
BRP10512052, MXPA06015241 - US 7200129, AU2005226531, CA2558551, CN1930809, GB2429378, JP4351720, BRP10508671, NZ549124, KR848483, RU2321952 The AMBE+2™ voice coding Technology embodied in this product is protected by intellectual property rights including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc. This voice coding Technology is licensed solely for use within this Communications Equipment.
For your safety Before using your radio, please read the following important safety and compliance information. Radio frequency exposure information For your own safety and to ensure you comply with the radio frequency (RF) exposure guidelines of the United States Federal Communication Commission’s (FCC), Industry Canada, and those from other administrations, please read the following information before using this radio.
■ Do not talk (transmit) on the radio more than the rated transmit duty cycle(50%). This is important because the radio radiates more energy when it is transmitting than when it is receiving. ■ When listening and talking on the radio, hold it upright in front of your face so that it is at least one inch (2.5 cm) away from any part of your face. Keeping the radio at the recommended distance is important because exposure to RF decreases rapidly the further away the antenna is from your body.
■ European Directive 2013/35/EU on minimum health and safety requirements regarding the exposure of workers to the risks arising from physical agents (electromagnetic fields). This radio complies with the IEEE and ICNIRP exposure limits for occupational/controlled RF exposure environments at operating duty factors of up to 50% talk to 50% listen.
Radio frequency emissions limits in the USA CFR Title 47 Part 15.19 (a) (1) - Receivers Part 15 of the FCC Rules imposes RF emission limits on receivers. This radio complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. CFR Title 47 Part 15.19 (a) (3) - All other devices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.
■ Consult the dealer or an experienced radio/TV technician for help. NOTICE: This radio is intended for use in occupational/controlled conditions where users have full knowledge of their exposure and can exercise control over their exposure to meet the occupational limits in FCC and International standards. This radio device is NOT authorized for general population consumer use.
Radio frequency emissions limits in Canada ISEDC RSS warning Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,including interference that may cause undesired operation of the device.
EMC regulatory compliance in Australia This product meets all ACMA regulatory requirements for electromagnetic compatibility (EMC). For more information about EMC compliance, visit the ACMA website at https://www.acma.gov.au/Industry/ Suppliers/Product-supply-and-compliance. Australia and New Zealand citizens band (148 to 174 MHz) AS/NZS 4365 deals with the use of frequencies in the 148 to 174 MHz band.
■ Channel 40 is the customary road vehicle channel. Health, safety and electromagnetic compatibility in Europe In the European Community, radio and telecommunications equipment is regulated by the Radio Equipment Directive (2014/52/EU). The requirements of this directive include protection of health and safety of users, as well as electromagnetic compatibility. Intended purpose of product This product is an FM radio transceiver.
Interference with electronic devices Warning Some electronic devices may be prone to malfunction due to the lack of protection from RF energy that is present when your radio is transmitting. Examples of electronic devices that may be affected by RF energy are: ■ aircraft electronic systems ■ vehicular electronic systems such as fuel injection, anti-skid brakes, and cruise control ■ medical devices such as pacemakers and hearing aids ■ medical equipment in hospitals or health care facilities.
Potentially explosive atmospheres and blasting areas Warning Unless the radio is specifically certified for use in a potentially explosive atmosphere, do not take the radio into such an atmosphere. An explosion could cause serious injury or death. Examples of potentially explosive atmospheres include any environment where there are flammable liquids, gases, or dusts. Warning Turn off the radio before approaching any area where you are instructed to turn off a two-way radio.
Electromagnetic compatibility in European vehicles In the European Community, radio equipment fitted to automotive vehicles is regulated by UNECE Regulation 10 Revision 5. The requirements of this regulation cover the electromagnetic compatibility of electrical or electronic equipment fitted to automotive vehicles. Unapproved modifications or changes to radio The radio is designed to satisfy the applicable compliance regulations.
Use of lithium-ion batteries Warning A damaged battery can cause an explosion or fire, and can result in personal injury and/or property damage. To prevent personal injury and/or damage to property, read the important safety information supplied with the battery. Short-circuiting battery contacts Warning Do not short-circuit the battery contacts, neither intentionally nor accidentally, e.g. by placing the battery with conductive materials such as keys or jewelry inside a pocket or container.
Menu map This section shows the menus and submenus that may be programmed for your radio (for radios with display only).
1 About this guide This user’s guide provides information about the T03-00302 (TP3300) and T03-00303 (TP3350) DMR conventional and analog portable radios. Both models are available with the following front panels: ■ display and 16 keys ■ display and 4 keys ■ no display and no keys These front panels are interchangeable. Contact your radio provide for more information. Bluetooth®(page 42), GPS (page 52), and man-down features are only available in TP3350 portables.
Notice This alert is used to highlight information that is required to ensure procedures are performed correctly. Incorrectly performed procedures could result in equipment damage or malfunction. This icon is used to draw your attention to information that may improve your understanding of the equipment or procedure. Related documentation The following documentation is also available for your Tait radio, which you can access from the Tait Technical Support website (http://support.taitradio.
2 Before using your radio Once you have unpacked your radio, there are a few tasks you must do before you can use it. The most important of these is to charge your battery for the first time — allow 2.5 hours for this. Warning Do not charge the battery or change the antenna in a hazardous location. An explosion could cause serious injury or death.
Package Contents Your TP3 package contains the following items: ■ Radio ■ Antenna(s) ■ Battery(s) ■ Battery Charger ■ Multi-National Plug Pack ■ Belt Clip ■ Safety and Compliance documents Before using your radio 23
For your safety — battery warning Warning This radio uses a Lithium-ion battery. If the battery is damaged or handled in an unsafe manner, it can cause personal injury and/or damage to property. Read the important safety information included with your battery. Attaching labels to the radio or battery The radio has recesses to attach labels to the front (not for 16-key radio), both sides and the rear. Please contact your Tait dealer for pre-printed, customized labels.
Charging the battery before first use Before using your battery for the first time, you must charge it. Follow the instructions included with your Tait charger. This information is repeated in the section "Charging and caring for batteries" on page 53. For best charging performance, switch off the radio before placing it in the charger.
Attaching the battery 1 Rotate the power/volume control switch counterclockwise to turn off the radio. If the battery has been attached while the radio is turned on, turn the radio off and then on again before use. 2 Insert the top of the battery into the recess at the back of the chassis. 3 Lightly press the bottom of the battery towards the radio until the battery catch clicks. 4 Make sure that the battery is firmly in position.
Attaching the antenna Before using the radio, screw the antenna clockwise into the antenna connector. The antenna should be screwed sufficiently tight so that it doesn’t unscrew easily. This is important as it creates a seal. Removing the antenna Warning Do not change the antenna in a hazardous location. An explosion could cause serious injury or death. Use a firm grip and turn the antenna counterclockwise half a turn. Use a lighter grip to fully unscrew the antenna, and carefully remove it.
Attaching an audio accessory Audio accessories plug into the radio’s accessory connector. The accessory connector is protected by a cover, which needs to be removed before an accessory can be installed. Notice The accessory cover protects the accessory connector from electrostatic discharge. Keep the cover in place unless the connector is in use. To remove the accessory cover and install an audio accessory: 1 Use a coin or other blunt object to loosen the screw that secures the accessory cover to the radio.
3 Getting started This section gives an overview of your DMR radio, describes the radio’s controls and indicators, and explains how the radio menus are organized.
About your DMR digital radio Your DMR digital radio can be programmed for DMR conventional. Analog conventional operation is also available. You may notice differences between digital and analog calls in terms of: ■ static noise in low signal areas, and ■ radio coverage in marginal reception areas. Lack of static noise On digital networks there is no static noise, even in low signal areas.
What you hear on an analog channel On analog channels, your radio may be programmed so that you hear all conversations on a channel, or your user group may be segregated from other user groups by using special signaling. The special signaling is used to control the muting and unmuting of your radio, so that your radio is muted when other user groups are talking and unmuted for members of your user group.
About the radio controls The radio controls are the PTT key, power/volume control, channel selector, scroll keys, selection keys, and function keys. Some keys have functions assigned to both short and long key presses: ■ a short key press is less than one second, and ■ a long key press is more than one second. The radio controls and their functions are described in the following sections.
Name PTT key Function Press and hold to transmit and release to listen Power/volume Rotate to turn the radio on and change control the speaker volume Channel Select and change channels selector Left and right Action determined by the text above the selection keys selection key Scroll keys Scroll up and down through a list of menu options, scroll left and right in messages, or access a pre-programmed menu Function keys Programmed for frequently used options Alphanumeric Used to enter letters and numbers key
Understanding the radio display The messages and icons you see on your radio display depend on the mode in which your radio is operating and the way it is programmed. Radio display icons These are some of the icons you may see on your radio display: Icon Meaning No signal. Signal strength indicator: the more bars, the stronger the signal being received by the radio Battery indicator: shows how much charge is available in the battery.
Icon Meaning Unread message. VOX enabled. Speaker open. Private Call Indicates a Private Call in progress. In the Contacts list, it indicates a subscriber alias (name) or ID (number). Bluetooth Audio Device Bluetooth-enabled audio device, such as a headset. Item sent successfully.
Understanding the radio indicators The status LED indicator and the radio’s audible tones—together with the radio display—all combine to give you information about the state of your radio. The most common way the indicators work is described in the following sections. The way these indicators behave may be affected by the way your radio is programmed. Status indicators status LED Color Red Meaning On: The radio is transmitting. Flashing: The battery is low.
Audible tones Warning Your radio may be programmed to be silent, which means you may not hear any alerts. The radio uses audible tones to alert you to its status: ■ Radio controls and keypress tones—the tones and beeps you hear when you press your radio’s keys or use the controls. ■ Incoming call tone—when the radio is receiving a call. ■ Warning tones—when there is an error, or the battery is low, for example.
Using function keys to access frequently used features The function keys provide access to some of the features you will use most often. These features are assigned to the function keys when the radio is programmed. Some keys may have a feature associated with both a short key press and a long key press.
Navigating the radio’s menus Radios with display have a number of menus, each containing lists or submenus. The menus available depend on the way your radio is programmed. See also "Menu map" on page 19. To access the menu, press the left selection key whenever Menu appears above it. Channel 3 Zone 1 Menu Main Menu Contacts Message Call log Zone Select Back Use the scroll keys to move through the menu list. When the menu you want is highlighted, press Select (left selection key).
4 Operation This section describes the basic operation of your radio.
Turning the radio on and off Rotate the On/Off/Volume control switch clockwise until you hear a click. You see a welcome message or welcome image. The LED lights up solid orange and the Home screen lights up if the backlight setting is set to turn on automatically. To turn off the radio, rotate the switch counterclockwise until you hear a click. You see a brief Powering Down on the radio’s display. Your radio may not turn on if your battery is very low. (See "Low battery warning" on page 56.
Adjusting the speaker volume Rotate the power/volume control clockwise to increase the speaker volume and counterclockwise to decrease the volume. The volume control also changes the volume level of the radio’s audible indicators. Connecting to a Bluetooth® device (TP3350 only) You may be able to connect a Bluetooth device to your radio. Compatibility with Tait radios Bluetooth devices may operate with Tait radios, provided they: ■ are compatible with the Bluetooth Specification Version 2.0 or higher.
3 Avoid coming in contact with the internal antenna of a headset or radio. Pairing a Bluetooth device with the radio Before attempting to connect a device, Tait recommends that the device is fully charged. Refer to the documentation of your Bluetooth device for charging instructions. Pairing creates a unique and encrypted wireless link between the radio, and the Bluetooth device. To use a device with your radio, they must first be paired.
5 Select Connect. The display shows Connecting to . Your Bluetooth device may require additional steps to complete the pairing. Refer to the documentation of your Bluetooth-enabled device. If successful, the radio display shows Connected. A tone sounds and √ appears beside the connected device. The Bluetooth Connected icon appears on the status bar, or if unsuccessful, the radio display shows Connected Failed.
Selecting a zone A zone is a group of channels. The 16-key and 4-key radios support up to 2000 channels and 250 zones, with a maximum of 160 channels per zone. The non-keypad radio supports up to 32 channels and two zones, with a maximum of 16 channels per zone. 16-key and 4-key radios ■ Press the function key programmed for Zone. or 1 Press Menu and select Zone. The selected zone is indicated by a . 2 Scroll to the required zone and press Select.
Making a group call 1 Turn the channel selector to select the channel with the active group alias or ID. 2 Hold the radio vertically one to two inches (2.5 to 5 cm) from your mouth. 3 Press the PTT key to make the call. The LED lights up solid red and the Group Call icon appears. The first text line shows the group call alias.
Making a private call 1 Turn the channel selector to select the channel with the active subscriber alias or ID. 2 Hold the radio vertically one to two inches (2.5 to 5 cm) from your mouth. 3 Press the PTT key to make the call. The LED lights up red. The Private Call icon appears. The first text line shows the subscriber alias. The second text line displays the call status. 4 Wait for the Talk Permit tone to finish (if enabled) and speak clearly into the microphone. 5 Release the PTT key to listen.
During scan, the LED flashes orange and the Scan icon is displayed. No-key no-display radio ■ Press the function key programmed to turn scan on or off. During scan, the LED flashes orange. Making a call alert 16-key and 4-key radios ■ Press the function key programmed to make a call alert to the predefined ID. or 1 Press Menu and select Contacts > Contact List. 2 Scroll to required contact and press Select. 3 Select Ctrl Services and Call Alert.
No-key no-display radio ■ Press the function key programmed to make a call alert to the predefined contact. The LED flashes when your radio is sending the call alert. If the Call Alert acknowledgement is received, two chirps sound. or If the Call Alert acknowledgement is not received, a low-pitched tone sounds. Sending a quick text message 16-key radio ■ Press the function key programmed to send a predefined quick text message to a predefined contact.
You can also press the right selectyion key to quit the operation. 5 Press Send. You can also press Save to save the message in the drafts. 6 Select Contact List, scroll to the required contact and then press Select. or Select Manual Dial end enter the subscriber ID and press Confirm. The display shows Sending Msg... and the LED flashes red.
No-key no-display radio ■ Press the function key programmed to send a predefined quick text message to a predefined ID. The LED flashes red. Two chirps indicate that the message has been sent, or a low-pitched tone indicates that the message cannot be sent. Sending an emergency alarm If your radio is set to silent, it will not display any audio or visual indicators during Emergency mode. ■ Press the function key programmed for emergency. The display shows Tx Alarm and the destination alias.
Turning location information on and off (TP3350 only) Your radio may be enabled to send location information. 16-key and 4-key radios 1 Press Menu and select Accessories > GPS. 2 Select GPS On/Off and select on or off. When GPS is turned on, the GPS icon will appear. Once a GPS signal is available, the GPS icon will change to . No-key no-display radio ■ Press the function key programmed for GPS to turn GPS on or off. If turned on, a positive tone sounds. If turned off, a negative tone sounds.
5 Charging and caring for batteries This section describes how to charge your Tait radio battery as well as care for it, to ensure safe operation, maximum performance and prolonged battery life.
About the chargers Unless otherwise indicated, the charging advice and instructions in this document apply to all chargers. The following chargers are available for your Tait radios and batteries: Part number range T03-00322-xxxx Designation Desktop charger Before using the charger Check the battery label and charger label to see if the charger is compatible with the battery. See also "About the chargers" on page 54. Warning Handle the battery safely.
Notice Turn the radio off before removing the battery, and turn it on again after attaching the battery. This ensures that the radio powers down and up correctly. Failing to follow this procedure may require the radio to be turned off then on again to operate correctly. Charging temperatures Notice Do not expose a battery to very high or very low temperatures for extended periods of time. Doing so will shorten the usable life (‘service life’) of the battery.
You can remove a battery/radio from the charger at any time without harming the battery, the radio, or the charger. When you return the battery/radio to the charger, charging is automatically resumed. Receiving calls while charging Notice For best charging performance, switch off the radio before placing it in the charger. You can receive a call while the radio is in the charger, but your radio performance may be degraded.
Charging a battery for the first time Fully charge a battery before using it for the first time. The red LED stays lit while the battery charges. Charging a battery Notice For best charging performance, switch off the radio before placing it in the charger. 1 Desktop charger: Connect the charger to the correct Tait power adaptor. 6-way charger: Power on the charger. Initially, all three LEDs are lit for 2 seconds.
LED behavior If there is a battery in the charger when power is supplied to the charger, the LEDs behave as follows: Meaning briefly The charger has been connected to a power supply. The battery is charging. steady Charging complete. Remove the battery, or steady leave it in the charger. ■ The battery temperature is outside the normal charging range. Charging will start or resume once the temperature is within normal limits. No action is required by you. ■ There is a fault. Contact your dealer.
Removing the battery from the charger ■ Lift the battery/radio out of the charger. You can remove a battery/radio from the charger at any time without harming the battery, the radio, or the charger. When you return the battery/radio to the charger, charging is automatically resumed. You can also leave a battery/radio in the charger once charging is complete. Maintaining battery life and performance With proper care and maintenance you will maintain the performance and life of the battery.
■ Remove the battery from the radio before storage. ■ Fully charge the battery if storing for less than one month. ■ Charge batteries to about 30% if storing for longer than one month. ■ Store in a cool dry place. Batteries that have been stored for any length of time must be charged before being used. See "Charging a battery for the first time" on page 57. Disposing of batteries Run the battery flat before disposing of it.
6 Troubleshooting This section describes troubleshooting procedures, and basic maintenance.
About troubleshooting If you are experiencing difficulty operating your radio, you may find the following sections helpful. Consult your radio provider for assistance, if necessary. When your radio won’t turn on If the LED on your radio does not glow red when the radio is turned on, it is probable that power is not reaching the radio.
General care Your radio requires no regular maintenance other than ensuring that the battery has sufficient charge and that no damage has occurred to the antenna or the battery. Notice To prevent permanent damage to the radio case, do not allow the radio to come into contact with detergents, alcohol, aerosol sprays, or petroleumbased products. For general battery care, see "Maintaining battery life and performance" on page 59.
Tait Software Licence Agreement This Software License Agreement ("Agreement") is between you (“Licensee”) and Tait International Limited (“Tait"). By using any of the Software items embedded and pre-loaded in the related Tait Designated Product, included on CD, downloaded from the Tait website, or provided in any other form, you agree to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, do not install or use any of the Software.
which the Open Source Software is licensed. “Person” means any individual, partnership, corporation, association, joint stock company, trust, joint venture, limited liability company, governmental authority, sole proprietorship, or other form of legal entity recognized by a governmental authority.
Without limiting the general nature of these restrictions, Licensee will not make the Software available for use by third parties on a "time sharing," "application service provider," "service bureau" basis, or for any other similar commercial rental or sharing arrangement. 4.2.
Rights in and to the Software and Documentation, in any form. No rights are granted to Licensee under this Agreement by implication, estoppel or otherwise, except for those rights which are expressly granted to Licensee in this Agreement.
fees and agreeing to be bound by this Agreement. 7.2. In the case of a value-added reseller or distributor of Tait Designated Products, the consent referred to in Section 7.1 may be contained in a Tait Reseller or Tait Distributor Agreement. 7.3.
the enforcement of the terms of this Agreement. SECTION 9 CONFIDENTIALITY Licensee acknowledges that the Software and Documentation contain proprietary and Confidential Information valuable to Tait and are Tait trade secrets, and Licensee agrees to respect the confidentiality of the information contained in the Software and Documentation. SECTION 10 LIMITATION OF LIABILITY 10.1.
acquisition of third-party Software in order to limit Security Vulnerabilities. While no software can be guaranteed to be free from Security Vulnerabilities, if a Security Vulnerability is discovered, Tait will take the steps specified in Section 6 of this Agreement. 11.9. EXPORT.
Simplified Declaration of Conformity EN Hereby, Tait International Limited declares that the radio equipment type TPEHGD, TPEHGE, TPEB1D & TPEB1E is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.taitradio.com/eudoc BG С настоящото Tait International Limited декларира, че този тип радиосъоръжение TPEHGD, TPEHGE, TPEB1D & TPEB1E е в съответствие с Директива 2014/ 53/ЕС.