User Manual

Your DMR digital radio can be programmed for DMR
conventional. Analog conventional operation is also
available.
You may notice differences between digital and
analog calls in terms of:
static noise in low signal areas, and
radio coverage in marginal reception areas.
On digital networks there is no static noise, even in
low signal areas. This lack of static is because your
digital radio removes the ‘noise’ from the call, so that
you hear only clear voice.
With digital networks, a call remains clear and then
drops off quickly at the border of a coverage area. The
reason for this is that a digital call is either received or
it isn't. With analog networks, the background noise in
a call gets progressively worse when you are in fringe
areas or even slightly outside normal coverage areas.