User Manual

Press the function key programmed to make a call
alert to the predefined contact.
The LED flashes when your radio is sending the call
alert.
If the Call Alert acknowledgement is received, two
chirps sound.
or
If the Call Alert acknowledgement is not received, a
low-pitched tone sounds.
Press the function key programmed to send a pre-
defined quick text message to a predefined con-
tact.
or
Press the function key programmed to open the
function. Go to step 2 below.
or
Press and select > .
Scroll to the required quick text and press .
Use the keypad to edit the message, if required.
a. Press to move to the left.
b. Press to move to the right.
c. Press the key to delete any unwanted
characters.
d. Press the key to input one space to the right.
e. Long-press the key to switch between
lowercase, upperacase and numeric input.
Press .