User Manual

You can also press the right selectyion key to
quit the operation.
Press .
You can also press to save the message
in the drafts.
Select , scroll to the required contact
and then press .
or
Select end enter the subscriber ID
and press .
The display shows and the LED
flashes red.
If the message is sent, a tone sounds and the display
or
If the message is not sent, a low tone sounds and the
display shows
Press the function key programmed to open the
Quick Text function. Go to step 2 below.
or
Press and select > .
Scroll to the required quick text and press .
Scroll to the required contact and press .
The display shows and the LED
flashes red.
If the message is sent, a tone sounds and the display
or
If the message is not sent, a low tone sounds and the
display shows