User Manual

%! $
You can also press the right selectyion key to
quit the operation.
% Press ).
You can also press )1to save the message
in the drafts.
& Select +, scroll to the required contact
and then press )(.
or
Select (,( end enter the subscriber ID
and press .
The display shows ) and the LED
flashes red.
If the message is sent, a tone sounds and the display
))J
or
If the message is not sent, a low tone sounds and the
display shows )(J
#:-
Press the function key programmed to open the
Quick Text function. Go to step 2 below.
or
 Press  and select > A-'2.
Scroll to the required quick text and press )(.
 Scroll to the required contact and press )(.
The display shows ) and the LED
flashes red.
If the message is sent, a tone sounds and the display
))J
or
If the message is not sent, a low tone sounds and the
display shows )(J