User's Guide
Table Of Contents
- User’s Guide
- Contents
- For your safety
- Menu map
- 1 About this guide
- 2 Before using your radio
- 3 Getting started
- 4 Operation
- Turning the radio on and off
- Adjusting the speaker volume
- Connecting to a Bluetooth® device (TP3350 only)
- Answering a Call Alert
- Selecting a zone
- Selecting a channel
- Changing a Channel
- Making a group call
- Making a private call
- Turning scanning on and off
- Making a call alert
- Sending a quick text message
- Sending an emergency alarm
- Turning location information on and off (TP3350 only)
- 5 Charging and caring for batteries
- About the chargers
- Before using the charger
- Charging temperatures
- Leaving the battery on charge
- Receiving calls while charging
- Low battery warning
- Charging a battery for the first time
- Charging a battery
- LED behavior
- Removing the battery from the charger
- Maintaining battery life and performance
- Storing batteries
- Disposing of batteries
- 6 Troubleshooting
- Tait Software Licence Agreement
- Simplified Declaration of Conformity
36 Getting started
Understanding the radio
indicators
The status LED indicator and the radio’s audible
tones—together with the radio display—all combine to
give you information about the state of your radio.
The most common way the indicators work is
described in the following sections.
The way these indicators behave may be
affected by the way your radio is programmed.
Status indicators
Color Meaning
Red On: The radio is transmitting.
Flashing: The battery is low.
Green On: The radio is receiving, or detecting
activity over the air.
Orange On: The radio is powering up.
Flashing: The Radio is scanning, or in
selective call, or emergency state.
status LED