User's Guide
Table Of Contents
- User’s Guide
- Contents
- For your safety
- Menu map
- 1 About this guide
- 2 Before using your radio
- 3 Getting started
- 4 Operation
- Turning the radio on and off
- Adjusting the speaker volume
- Connecting to a Bluetooth® device (TP3350 only)
- Answering a Call Alert
- Selecting a zone
- Selecting a channel
- Changing a Channel
- Making a group call
- Making a private call
- Turning scanning on and off
- Making a call alert
- Sending a quick text message
- Sending an emergency alarm
- Turning location information on and off (TP3350 only)
- 5 Charging and caring for batteries
- About the chargers
- Before using the charger
- Charging temperatures
- Leaving the battery on charge
- Receiving calls while charging
- Low battery warning
- Charging a battery for the first time
- Charging a battery
- LED behavior
- Removing the battery from the charger
- Maintaining battery life and performance
- Storing batteries
- Disposing of batteries
- 6 Troubleshooting
- Tait Software Licence Agreement
- Simplified Declaration of Conformity
Operation 41
Turning the radio on and off
Rotate the On/Off/Volume control switch clockwise
until you hear a click. You see a welcome message or
welcome image.
The LED lights up solid orange and the Home screen
lights up if the backlight setting is set to turn on
automatically.
To turn off the radio, rotate the switch
counterclockwise until you hear a click. You see a
brief Powering Down on the radio’s display.
Your radio may not turn on if your battery is very
low. (See "Low battery warning" on page 56.)
Security lock on power-up feature
Your radio may be automatically locked each time it is
powered-up.
1 Power up the radio.
2 Enter your current six-digit password with the radio
keypad. The display shows ******.
You hear a positive indicator tone for every digit
pressed.
3 Press the right selection key to remove the each *
on the display.
4 Press the left selection key to proceed.
If the password is correct, your radio proceeds to
power up.
If the password is incorrect, the display shows
Password Input Error. Repeat step 2.