User's Guide
Table Of Contents
- User’s Guide
- Contents
- For your safety
- Menu map
- 1 About this guide
- 2 Before using your radio
- 3 Getting started
- 4 Operation
- Turning the radio on and off
- Adjusting the speaker volume
- Connecting to a Bluetooth® device (TP3350 only)
- Answering a Call Alert
- Selecting a zone
- Selecting a channel
- Changing a Channel
- Making a group call
- Making a private call
- Turning scanning on and off
- Making a call alert
- Sending a quick text message
- Sending an emergency alarm
- Turning location information on and off (TP3350 only)
- 5 Charging and caring for batteries
- About the chargers
- Before using the charger
- Charging temperatures
- Leaving the battery on charge
- Receiving calls while charging
- Low battery warning
- Charging a battery for the first time
- Charging a battery
- LED behavior
- Removing the battery from the charger
- Maintaining battery life and performance
- Storing batteries
- Disposing of batteries
- 6 Troubleshooting
- Tait Software Licence Agreement
- Simplified Declaration of Conformity
Operation 45
Selecting a zone
A zone is a group of channels.
The 16-key and 4-key radios support up to 2000
channels and 250 zones, with a maximum of 160
channels per zone.
The non-keypad radio supports up to 32 channels and
two zones, with a maximum of 16 channels per zone.
16-key and 4-key radios
■ Press the function key programmed for Zone.
or
1 Press Menu and select Zone.
The selected zone is indicated
by a .
2 Scroll to the required zone and
press Select.
No-key no display radio
■ Press the function key programmed for Zone.
You hear a positive indicator tone, indicating the radio
has switched from Zone 1 to Zone 2.
or
You hear a negative indicator tone, indicating the
radio has switched from Zone 2 to Zone 1.
Selecting a channel
Once the required zone is displayed (if you have
multiple zones in your radio), turn the channel selector
to select the channel.
Select Back
Zone 1
Zone 2
Zone 2/2