User's Guide

50 Operation
You can also press the right selectyion key to
quit the operation.
5 Press Send.
You can also press Save to save the message
in the drafts.
6 Select Contact List, scroll to the required contact
and then press Select.
or
Select Manual Dial end enter the subscriber ID
and press Confirm.
The display shows Sending Msg... and the LED
flashes red.
If the message is sent, a tone sounds and the display
Send Success!
or
If the message is not sent, a low tone sounds and the
display shows Send Failed!
4-key radio
■ Press the function key programmed to open the
Quick Text function. Go to step 2 below.
or
1 Press Menu and select Message > Quick Text.
2 Scroll to the required quick text and press Select.
3 Scroll to the required contact and press Select.
The display shows Sending Msg... and the LED
flashes red.
If the message is sent, a tone sounds and the display
Send Success!
or
If the message is not sent, a low tone sounds and the
display shows Send Failed!