User's Guide

Attaching labels to the radio or battery
Do not cover the battery vent hole or the vent hole on the radio chassis. If the vent
on the battery is obstructed, the battery may explode, causing personal injury
and/or damage to property. If the vent on the radio is obstructed, audio quality
and/or key function may deteriorate and radio seals may be damaged.
Figure 2.1 Radio chassis and battery vent holes
Notice Taitrecommendsthatadditionallabelsarenotappliedtothesurfacesbetweentheradio
chassisandthebattery.Thefitbetweenthesesurfacesisintentionallyfirmandanyaddedthickness
willdamagethepointsofattachmentbetweenradioandbattery.
Ifacustomerrequiresacustomizedlabel,useonlyathingummedpaperlabelwithamaximumthicknessof1/32inch
(0.1mm).Attachthecustomizedlabelinthesparelabelrecessinthechassis(ifavailable),oroveranexistinglabel.
Thecustomizedlabelmaybeappliedtothebottom25%oftheradiochassislabeland/ortothetop25%ofthebattery
label.
Donotobstructthebatteryventhole(seeWarningabove).Donotallowthepaperlabeltoextendbeyondthe
recessedlabelareaortoconcealrelevantproductinformation.
Attaching a label to the front panel
Ifacustomerrequiresanadditionallabel,attachthelabelinthesparelabelrecessinthebottomsurfaceoftheradio
frontpanel.Inthisposition,thelabelisstillvisiblewhilethebatteryisattachedtotheradio.
18
Tait International Ltd December 2019