User's Manual Part 6


#*2')  
  

The following Table explains the commands that may be sent to test the software.
<  ' $(   %
Command Test Procedure Expected Result
Go To Channel 1.
Send command “g01206” Radio changes channel to 2, then returns the
command prompt.
2.
Send command “g0203D4” Radio changes channel to 3, then returns the
command prompt.
3.
Send command “g03004A2” Radio changes channel to 4, then returns the
command prompt.
4.
Send command “g0225D0” Radio sends error message “e03020A6”
(invalid channel)
Transmit 1.
Send command “b04this82” Radio transmits this data and “i04this7B” is
received by the other radio.
2.
Send command “b17This is a test
command.14”
Radio transmits this data and “i17This is a
test command.0D” is received by the other
radio.
3.
Send a “b” command while the
PTT is pressed.
Radio sends error message ”e03010A7”
(communication error)
4.
Send a command while the busy
led is lit
Radio sends error message “e03010A7”
(communication error)
Null
Send command “n0032” Radio returns a prompt (“
•
”).
Query
Send command “q002F”
T2010:
a valid message could be
“m0C31.011.01004D9” i.e.
[RU TYPE] = T2010,
[VERSION] = 1.01
[PVERSION] = 1.01
[NUM CHANNELS] = 04
T2015:
a valid message could be
“m0C41.011.01024D6”
[RU TYPE] = T2015,
[VERSION] = 1.01
[PVERSION] = 1.01
[NUM CHANNELS] = 24
Command Line Errors 1.
Send command ”b03this83” Radio sends error message “e03003A5”
(parameter error).
2.
Send command “b04this83” Radio sends error message “e03002A6”
(checksum error).
3.
Send command “t04this70” Radio sends error message “e03001A7”
(unsupported command).