User's Manual Part 5


-!) 
  
 ;*?
The T2000-36 Selcall PCB plugs into an options connector on the top side of the logic
PCB, and provides selective tone calling (Selcall) facilities for T2010,T2015, T2020 or
T2050 model T2000 Series II radios.
This option allows selective individual or group calls within a fleet of radios, on chan-
nels that have Selcall programmed. Selcall parameters and features are set up and ena-
bled during programming. Both Sigtec and International group formats are supported
by the T2000-36 PCB.
The following topics are covered in this Section:
Section Title Page
8.8.1 Components Required 8.8.2
8.8.2 Fitting 8.8.2
8.8.3 PCB Information 8.8.4