User's Manual
Table Of Contents
- Tait Contact Information
- Contents
- Preface
- 1 System Specifications
- Transmit Power and Current Consumption - 240VAC Input
- Transmit Power and Current Consumption - 110VAC Input
- Transmit Power and Current Consumption - AC Input Voltage Extremes
- Transmit Power and Current Consumption - 12.5VDC Input
- Transmit Power and Current Consumption - DC Input Voltage Extremes
- Receive Power and Current Consumption
- Dimensions and Weight
- Isolation
- 2 Reciter Specifications
- General
- Receiver RF Section
- Receiver Audio Section - General
- Receiver Audio Section - CTCSS
- Receiver Audio Section - Gating Operation
- Exciter RF Section
- Exciter Audio Section - Inputs
- Exciter Audio Section - Modulation Characteristics
- Exciter Audio Section - CTCSS
- External Reference Input
- Compliance Standards
- 3 Power Amplifier and Transmitter Specifications
- 4 Power Management Unit Specifications
TB8100 Specifications Manual System Specifications 11
© Tait Electronics Ltd June 2004
AW
Deep Sleep Mode*
200ms Receiver Cycling
500ms Receiver Cycling
1s Receiver Cycling
5s Receiver Cycling
*with power save control panel and standby power
supply card
160mA
122mA
109mA
98mA
2.0W
1.52W
1.36W
1.23W
Receive Power and Current Consumption (Continued)
Dimensions and Weight
Dimensions
Height
Width
Length
Subrack Only
Including Front Panel
176.8mm (7in)
482.6mm (19in)
385mm (15.2in)
410mm (16.1in)
Weight*
Single 5/50W Base Station System
Dual 5/50W Base Station System
Single 100W Base Station System
*with AC and DC PMU
20.6kg (45.4lb)
27.6kg (60.8lb)
21.5kg (47.4lb)
Isolation
Coaxial Changeover Relay Isolation when the base station is used in simplex mode using a
single antenna with a coaxial changeover relay, the
isolation of this relay must be ≥40dB