User's Manual
Table Of Contents
- Tait Contact Information
- Contents
- Preface
- 1 System Specifications
- Transmit Power and Current Consumption - 240VAC Input
- Transmit Power and Current Consumption - 110VAC Input
- Transmit Power and Current Consumption - AC Input Voltage Extremes
- Transmit Power and Current Consumption - 12.5VDC Input
- Transmit Power and Current Consumption - DC Input Voltage Extremes
- Receive Power and Current Consumption
- Dimensions and Weight
- Isolation
- 2 Reciter Specifications
- General
- Receiver RF Section
- Receiver Audio Section - General
- Receiver Audio Section - CTCSS
- Receiver Audio Section - Gating Operation
- Exciter RF Section
- Exciter Audio Section - Inputs
- Exciter Audio Section - Modulation Characteristics
- Exciter Audio Section - CTCSS
- External Reference Input
- Compliance Standards
- 3 Power Amplifier and Transmitter Specifications
- 4 Power Management Unit Specifications
26 Power Amplifier and Transmitter Specifications TB8100 Specifications Manual
© Tait Electronics Ltd June 2004
Identifying the PA You can identify the model and hardware configuration of a PA by referring
to the product code printed on labels on the heatsink and rear of the cover.
The meaning of each character in the product code is explained in the table
below.
Note This explanation of PA product codes is not intended to suggest
that any combination of features is necessarily available in any one
PA. Consult your nearest Tait Dealer or Customer Service
Organisation for more information regarding the availability of
specific models and options.
Product Code Description
TBAX
XXX-XXXX 7 = 5W
8 = 50W
9 = 100W
TBAXX
XX-XXXX 0 = default
TBAXXXX-XXXX Frequency Band and Sub-band
B1 = 136MHz to 174MHz
H0 = 400MHz to 520MHz
TBAXXXX-X
XXX 0 = default
TBAXXXX-XXXX 0 = default
TBAXXXX-XXXX 0 = default
TBAXXXX-XXXX 0 = default
380MHz to 520MHz