User's Manual
Table Of Contents
- Tait Contact Information
- Contents
- Preface
- 1 System Specifications
- Transmit Power and Current Consumption - 240VAC Input
- Transmit Power and Current Consumption - 110VAC Input
- Transmit Power and Current Consumption - AC Input Voltage Extremes
- Transmit Power and Current Consumption - 12.5VDC Input
- Transmit Power and Current Consumption - DC Input Voltage Extremes
- Receive Power and Current Consumption
- Dimensions and Weight
- Isolation
- 2 Reciter Specifications
- General
- Receiver RF Section
- Receiver Audio Section - General
- Receiver Audio Section - CTCSS
- Receiver Audio Section - Gating Operation
- Exciter RF Section
- Exciter Audio Section - Inputs
- Exciter Audio Section - Modulation Characteristics
- Exciter Audio Section - CTCSS
- External Reference Input
- Compliance Standards
- 3 Power Amplifier and Transmitter Specifications
- 4 Power Management Unit Specifications
TB8100 Specifications Manual Power Amplifier and Transmitter Specifications 27
© Tait Electronics Ltd June 2004
General
Supply Voltage
Operating Voltage
Standard Test Voltage
Polarity
Polarity Protection
26.5VDC to 29.5VDC
28VDC
negative earth only
reverse polarity diode
Supply Current
Standby
Transmi t*
5W PA @ 5W
50W PA @ 50W
100W PA @ 100W
*into a 50Ω load
Maximum Typical
50mA 42mA
600mA 530mA
5A 4.2A
10A 8.3A
Operating Temperature Range –30°C to +60°C (–22°F to +140°F) ambient
temperature*
*ambient temperature is defined as the temperature of the air
at the intake to the cooling fan
Cooling forced air over heatsink via fan mounted in subrack
Connectors
28VDC Input
RF Input
RF Output
Control and Alarm
Phoenix Combicon MVSTBR2.5HC
SMA female
N-type female
16-way IDC male
Dimensions
Height
Length
Width
5W and 50W PAs
100W PA
86mm (3.4in)
350mm (13.8in)
144mm (5.7in)
177mm (7in)
Weight
5 and 50W PAs
100W PA
4.9kg (10.8lb)
5.8kg (12.8lb)