User's Manual
Table Of Contents
- Tait Contact Information
- Contents
- Preface
- 1 System Specifications
- Transmit Power and Current Consumption - 240VAC Input
- Transmit Power and Current Consumption - 110VAC Input
- Transmit Power and Current Consumption - AC Input Voltage Extremes
- Transmit Power and Current Consumption - 12.5VDC Input
- Transmit Power and Current Consumption - DC Input Voltage Extremes
- Receive Power and Current Consumption
- Dimensions and Weight
- Isolation
- 2 Reciter Specifications
- General
- Receiver RF Section
- Receiver Audio Section - General
- Receiver Audio Section - CTCSS
- Receiver Audio Section - Gating Operation
- Exciter RF Section
- Exciter Audio Section - Inputs
- Exciter Audio Section - Modulation Characteristics
- Exciter Audio Section - CTCSS
- External Reference Input
- Compliance Standards
- 3 Power Amplifier and Transmitter Specifications
- 4 Power Management Unit Specifications
36 Power Management Unit Specifications TB8100 Specifications Manual
© Tait Electronics Ltd June 2004
Output - AC and DC Modules
High Current Output for PA
Voltage
Current
Regulation
Ripple and Noise*
Ripple and Noise rms
Transient Response on 28V Loadstep**
*100MHz bandwidth
**10% to 100% loadstep
28V
14A maximum
±0.5%
50mV pp
10mV rms
2% overshoot and recover within 0.6ms
Low Current Output for Reciter
Voltage
Current
Regulation
Ripple and Noise*
Ripple and Noise rms
*100MHz bandwidth
28.6V
26.5V in hysteresis mode
1.2A maximum
±3.5%
50mV pp
10mV rms
Protection - PA Output
Overload
Short Circuit
Overvoltage
AC Module
DC Module
electronic current limit above 16A
hiccup mode, self-resetting
electronic shutdown latch (33.5V)
electronic hysteric control (33.5V)
Protection - Reciter Output
Short Circuit 2.5A self-resetting fuse
Optional 10W Standby Output - DC Module
Low Current Output for Reciter
Voltage
Current
Regulation
Ripple and Noise*
Ripple and Noise rms
*100MHz bandwidth
28.9V
0.3A maximum
±2.5%
50mV pp
10mV rms
Protection
Overload/Short Circuit electronic current limit