User's Manual
Table Of Contents
- Tait Contact Information
- Contents
- Preface
- 1 System Specifications
- Transmit Power and Current Consumption - 240VAC Input
- Transmit Power and Current Consumption - 110VAC Input
- Transmit Power and Current Consumption - AC Input Voltage Extremes
- Transmit Power and Current Consumption - 12.5VDC Input
- Transmit Power and Current Consumption - DC Input Voltage Extremes
- Receive Power and Current Consumption
- Dimensions and Weight
- Isolation
- 2 Reciter Specifications
- General
- Receiver RF Section
- Receiver Audio Section - General
- Receiver Audio Section - CTCSS
- Receiver Audio Section - Gating Operation
- Exciter RF Section
- Exciter Audio Section - Inputs
- Exciter Audio Section - Modulation Characteristics
- Exciter Audio Section - CTCSS
- External Reference Input
- Compliance Standards
- 3 Power Amplifier and Transmitter Specifications
- 4 Power Management Unit Specifications
TB8100 Installation and Operation Manual Connection 85
© Tait Electronics Ltd March 2004
Figure 7.3 Dual 5 or 50W Base Station Inputs and Outputs - Rear View
b
system interface connector
g
auxiliary 12VDC output
c
external reference frequency input
h
AC mains input
d
RF output
i
RF input
e
–VDC input
j
auxiliary 12VDC input for system interface
f
+VDC input
1)
subrack ground connector
bc d fe
higidjj
PA 1PA 2reciter 1reciter 2 PMU
bc
1)
Figure 7.4 Standard Control Panel Inputs and Outputs
b
DC outputs for fans mounted on front panel;
also used for fan rotation detectors (if fitted)
d
RS-232 programming port
c
microphone connector
b
c
d