User's Manual
Table Of Contents
- Tait Contact Information
- Contents
- Preface
- 1 System Specifications
- Transmit Power and Current Consumption - 240VAC Input
- Transmit Power and Current Consumption - 110VAC Input
- Transmit Power and Current Consumption - AC Input Voltage Extremes
- Transmit Power and Current Consumption - 12.5VDC Input
- Transmit Power and Current Consumption - DC Input Voltage Extremes
- Receive Power and Current Consumption
- Dimensions and Weight
- Isolation
- 2 Reciter Specifications
- General
- Receiver RF Section
- Receiver Audio Section - General
- Receiver Audio Section - CTCSS
- Receiver Audio Section - Gating Operation
- Exciter RF Section
- Exciter Audio Section - Inputs
- Exciter Audio Section - Modulation Characteristics
- Exciter Audio Section - CTCSS
- External Reference Input
- Compliance Standards
- 3 Power Amplifier and Transmitter Specifications
- 4 Power Management Unit Specifications
TB8100 Specifications Manual 5
© Tait Electronics Ltd June 2004
Preface
Scope of Manual
Welcome to the TB8100 base station system Specifications Manual. This
manual provides general, performance and physical specifications for the
TB8100 5W, 50W and 100W base station systems.
Enquiries and Comments
If you have any enquiries regarding this manual, or any comments,
suggestions and notifications of errors, please contact Technical Support
(refer to
“Tait Contact Information” on page 2).
Updates of Manual and Equipment
In the interests of improving the performance, reliability or servicing of the
equipment, Tait Electronics Ltd reserves the right to update the equipment
or this manual or both without prior notice.
Copyright
All information contained in this manual is the property of Tait Electronics
Ltd. All rights are reserved. This manual may not, in whole or in part, be
copied, photocopied, reproduced, translated, stored, or reduced to any
electronic medium or machine-readable form, without prior written
permission from Tait Electronics Ltd. All trade names referenced are the
service mark, trademark or registered trademark of the respective
manufacturers.
Disclaimer
There are no warranties extended or granted by this manual. Tait
Electronics Ltd accepts no responsibility for damage arising from use of the
information contained in the manual or of the equipment and software it
describes. It is the responsibility of the user to ensure that use of such
information, equipment and software complies with the laws, rules and
regulations of the applicable jurisdictions.