User's Manual
Table Of Contents
- Specifications Manual
- Tait Contact Information
- Contents
- Preface
- 1 System Specifications
- Supply
- Power Consumption @ 13.8 VDC
- Power Consumption Band B1, 25 W*
- Power Consumption Band B1, 50 W*
- Power Consumption Band H5, 25 W*
- Power Consumption Band H5, 40 W*
- Power Consumption Band H6, 25 W*
- Power Consumption Band H7, 40 W*
- Transmitting into 5:1 VSWR*
- Channel Data
- Environmental
- Physical
- Isolation
- RF Compliance
- EMC Compliance
- Environmental Compliance
- Safety Compliance
- General
- 2 Receiver Specifications
- 3 Transmitter Specifications
16 Receiver Specifications TB7100 Specifications Manual
© Tait Electronics Limited May 2005
Identifying the
Receiver
You can identify the model and hardware configuration of a receiver module
by referring to the product code printed on a label on the top of the module.
The meaning of each character in the product code is explained in the table
below.
Note This explanation of receiver product codes is not intended to sug-
gest that any combination of features is necessarily available in any
one Receiver. Consult your nearest Tait Dealer or Customer
Service Organisation for more information regarding the availabil-
ity of specific models and options.
Product Code Description
XMADa
b-cdee a denotes digital architecture
1 = EP1C6/5402
2 = EP1C12/5409
3 = EP1C12/5509
XMADab-cdee b denotes power
3 = 25 W
5 = 40/50 W
XMADab-cd
ee cd denotes frequency band
A4 = 66 MHz to 88 MHz (Later release)
B1 = 136 MHz to 174 MHz
C0 = 174 MHz to 225 MHz (Later release)
D1 = 216 MHz to 266 MHz (Later release)
H5 = 400 MHz to 470 MHz
H6 = 450 MHz to 530 MHz
H7 = 450 MHz to 520MHz
XMADab-cdee
ee denotes radio options
02 = transmitter
03 = receiver