User's Manual

16 Connection TB7100 Installation Guide
© Tait Electronics Limited May 2005
Serial Interface
The serial interface connector provides a data connection to the TB7100
base station. The pin allocations for the 9-way female D-range serial
interface connector are listed in the table below.
DC Input The DC input connector is a heavy duty M4 screw terminal connector
suitable for many forms of connection. The pin allocations for the 2-way
DC input connector are listed in the table below.
RF Connectors See earlier reference on page 14.
Ground Mounted on the rear panel in the left hand corner is a terminal for
grounding the TB7100 tray to the mounting rack.
Serial Interface Pin Signal Name Signal Type Notes
1 not connected not used
2 receive data output data transmitted by TB7100
3 transmit data input data received by TB7100
4 not connected not used
5 ground ground
6 not connected not used
7 ready to transmit output request to send
8 clear to send input clear to send
9 not connected not used
h
j
b
g
i
c
d
e
f
external view
DC Input Pin Signal Name Signal Type Notes
1 13.8VDC input
2 ground input
12
External view
Bottom of TB7100
+
_