User's Manual

8 Installation TB7100 Installation Guide
© Tait Electronics Limited March 2006
1.3.2 FCC Compliance
1
This device complies with part 15 of the FCC Rules. Operation is subject
to the condition that this device does not cause harmful interference.
1.3.3 Unauthorised Modifications
Any modifications you make to this equipment which are not authorised by
Tait Electronics Ltd. may invalidate your compliance authority’s approval to
operate the equipment.
1.3.4 Health, Safety and Electromagnetic Compatibility in Europe
In the European Community, radio and telecommunications equipment is
regulated by Directive 1999/5/EC, also known as the Radio and
Telecommunications Terminal Equipment (R&TTE) directive.
The requirements of this directive include protection of health and safety of
users, as well as electromagnetic compatibility.
Intended Purpose of
Product
This product is an FM radio transceiver. Its intended purpose is for radio
communication in Private Mobile Radio (PMR) services or Public Access
Mobile Radio (PAMR) services.
Important This product can be programmed for frequencies or emis-
sions that may make its use illegal. A license must be
obtained before this product is used. All license require-
ments must be observed. Limitations may apply to transmit-
ter power, operating frequency, channel spacing, and emis-
sion.
Declaration of
Conformity
Brief Declarations of Conformity appear on page 28. You can download the
formal Declaration of Conformity from http://eudocs.taitworld.com/.
You can also obtain a signed and dated paper copy of the Declaration of
Conformity from Tait Europe Ltd.
For Customers in
Luxembourg
This equipment must not be operated as a data repeater in Luxembourg
unless it is used in conjunction with an approved Channel Access Controller
that meets the requirements of ETSI standard EN 300 471.
1. Refer to the specifications manual for more information on the compliance standards to which
the base station has been tested and approved.