User's Manual

Taiwan Carol Electronics Co., Ltd.

6. Special Notes

6.1 Do not use new and dead batteries together (or use batteries of different specification). The

dead battery (or low power batter) will hinder most power supply and reduce the life of a new

battery, and could even cause leakage or explosion.

6.2 Receiver (RX) can only receive sound signal from one transmitter (TX) and cannot receive

signals simultaneously from two or more transmitters (TX).

6.3 If alkaline battery or others of similar specification, Bluetooth receiver (transmitter) can

operate for approximately 8 hours.

6.4 Connection between mobile phone and receiver (RX):

Set up the receiver (RX) first to automatic connection status. Set up the mobile phone by

referring to mobile phone manual. General mobile phone setup procedure is “search > pair >

connect”. During automatic connection, it probably needs to enter “0000” pairing code in the

mobile phone.

6.5 Connection between Bluetooth computer and receiver (RX):

It is recommended to use the software by IVT Corporation from the following website:

http://www.ivtcorporation.com/download/BlueSoleil_Download.php

Bluetooth computer setup procedure is generally like “search > pair > function search > select

function connection”. Follow computer operating instructions. Remember to set up receiver

(RX) to automatic connection status first with pairing code “0000”. After connection, on

computer select the Bluetooth device as sound output device.

6.6 To connect Bluetooth computer and transmitter (TX), first set the Bluetooth computer to be

available for search and set it to be stereo earphone device. After connection, on computer

select the Bluetooth device as sound input device.

6.7 The name of transmitter (TX) is shown on computer as “CAROL BTM-210D” or “CAROL

BTM-210C”; the name of receiver (RX) is shown on mobile phone or computer as “CAROL

BTM-210R”.