User's Manual

Digital Wireless Microphone User Manual
15
Capsule：Condenser (ø 6) (with electronic filters)
Frequency Response：100Hz ~ 10,000 Hz
Output impedance：2.2K 30%(at 1,000 Hz)
Sensitivity：-63±3dB ( 0dB=1V/μbar；at 1,000 Hz)
Weight：39g± 5g
8.6 Power Adapter
Input : AC 120/230, 20W
Output : DC 7.5V/1A
9. Precautions：
9.1 To avoid damaging the circuit, do not exposure the product to rain, water, and
heavy humidity environment, or immerse the product in solution.
9.2 Avoid dropping or throwing the product, or hitting and beating the product by
external force.
9.3 Do not use the product under high temperature environment.
9.4 Do not use the power adapter from other electronic devices as it might damage the
electric circuit.
9.5 Avoid approaching the TV set, computer monitor, or any electric devices with CRT
monitor as the product might interferes the monitor display.
9.6 While using the wireless microphone, keep the Receiver away from any
interference sources such as computer or communication equipment.
9.7 If not in used for a long period of time, remove batteries from the Wireless
Transmitter, and store them separately.
9.8 When the status LED keeps blinking after the Wireless Transmitter is on, it
indicates the battery energy is running low, so please replace the batteries.
9.9 Please read the manual carefully. When replacing headset microphone and tie-clip
microphones, please replace according to product specification to prevent damage
from improper use to obtain the best performance of product.
10. Certifications: This product is in compliance with the following requirements and
regulations:
10.1 CE
10.1.1 EMC：EN 301489-1 / EN 301489-3
10.1.2 RF：EN 300440
10.1.3 LVD：EN 60065
10.2 FCC
：FCC Part15C
10.3 NCC：LP0002