User's Manual

P43.
OPERATION MODE
HOW TO UNLOCK
1. Enter a valid code, put card to contact with the inductive zone, or press unlock button on the
remote control to unlock the lockset.
2. With double authorization mode is turned on, both user code and card, or both user code and
remote control, must be authenticated to unlock the lockset.
Note:
1. If you cannot unlock the lockset by using card, especially the lockset is mounted outside or
under the sun, please wakeup the lockset by pressing button on the keypad first, then
unlock the lockset by using card.
2. When you enter codes, the keypad backlight will also be activated automatically under
low-light environment.
3. Please press button to clear previous codes and re-enter codes if the previous codes are
incorrect.
4. If you do not press button to clear previous incorrect codes, the red LED will light up
and you have to wait until the red LED lights off, then the lockset is allowed to re-enter codes.