User's Guide

1
2
3
4
5
6
7
8
9
0
2
KEYPAD
1. Unlocks the lockset by entering a valid User Code.
2. Programs the lockset by entering a valid Programming Code in
Programming Mode.
G00-KPDAF19A-0C06 Rev. 21/09-00
USER GUIDE
1
OVERVIEW OF THE LOCKSET
1
HOW TO LOCK / UNLOCK THE LOCKSET
2
HOW TO LOCK / UNLOCK / PROGRAM THE LOCKSET
2
HOW TO PROGRAM THE LOCKSET
・The lockset will exit the programming mode and resume to the stand-by status if no input is made in 10 seconds.
・3 Beeps means something was entered incorrectly. Please redo the step again.
1
1. Lock or unlock the lockset by a valid key.
3
MECHANICAL KEYWAY OVERRIDE
Change Programming Code
Add a User Code(S)
・Programming Code can be used to program or unlock the lockset.
・User Code can be used to unlock the lockset.
・User Code cappcity: 200 sets (4-6 digits).
Delete individual User
/ Single-entry Code(s)
・Delete individual User Code(s).
Volume Control
Auto-lock
・Turn on / off door lock operation volume.
・Volume is always on in the programming mode.
・Default Auto-lock Delay Timer : 10 seconds.
・Auto-lock Delay Timer range: 10 -99 seconds.
.
Auto-lock Delay Timer
Vacation Mode
・Vaction mode temporarily disable ALL User Codes.
Add Single-entry Code(s)
・Single-use User Code can only be used once to unlock the lockset.
・Single-use User Code capacity: 5 sets (4 digits).
・Auto-lock is disabled by default.
BASIC SETTINGS
ADVANCED SETTINGS
ENTER / LOCK BUTTON
1. Red light: Represents an incorrect entry or the unit is
programming mode.
2. Yellow light: Flashes when the batteries are low in power.
3. Green light: Represents a correct entry.
4. Press to activate or lock the lockset.
Programming Code
(4-6 digits)
New Programming
Code(4-6 digits)
1
0
New User Code
(4-6 digits)
2
0
Programming Code
(4-6 digits)
3
0
Programming Code
(6 digits)
User Code / Single-entry
Code (4-6 digits)
Press [SET] for
1 second.
Press [SET] for
1 second.
Press [SET] for
1 second.
Programming Code
(4-6 digits)
4 0
Press [SET] for
1 second.
Add another code
Delete another code
Delete all User / Single-entry
Codes
・Delete all User & Single-entry Codes.
7
0
Programming Code
(4-6 digits)
Enter New Amount
(10 - 99)
Press [SET] for
1 second.
5
0
Programming Code
(4-6 digits)
1
Turn On
0
Turn Off
Press [SET] for
1 second.
6
0
Programming Code
(4-6 digits)
1
Turn On
0
Turn Off
Press [SET] for
1 second.
8
0
Programming Code
(4-6 digits)
1
Turn On
0
Turn Off
Press [SET] for
1 second.
2
1
Programming Code
(4-6 digits)
Single-entry Code
(4 digits)
Press [SET] for
1 second.
Add another code
5
[SET] BUTTON
1. Press set button for 1 second to enter programming mode.
2. Please refer to for more information about
programming mode.
2
2
-
1. Locks or unlocks the lockset manually.
INTERIOR THUMBTURN
6
4
BATTERY COVER
1. Protects the batteries from unexpected damage.
Include / Exclude to Z-Wave
network
・Turn on inclusion / exclusion mode at your Z-Wave controller when
including / excluding the lock.
・Refer to your Z-Wave controller instruction for more information.
If your Z-wave controller requires you to input
DSK (Device Security Key) to complete inclusion,
please find the DSK on the sticker on the left or
on the battery case.
9
0
Programming Code
(4-6 digits)
Press [SET] for
1 second.
Include / Exclude unsuccessfully (beep x 3)
Include / Exclude successfully (beep x 1)
OR
Enter valid User Code or
Programming Code.
Keypad is temporarily disabled for 1 minute after 4 consecutive incorrect entries.
To lock
To unlock
Press “ ”
to lock.
OR
OR
OR
Use a mechanical
key to lock.
Use a mechanical key
to unlock.
Lock or unlock by
mobile app.
OR
Lock or unlock by
mobile app.
→
→
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
If your lock is in factory default settings, enter 4~6 digits to set up programming code after you power the lockset.
The lock will automatically set up bolt direction after programming mode is set.
Z-Wave DSK QR code
*****
-
*****
-
*****
-
*****
-
*****
-
*****
-
*****
-
*****
A
A