Datasheet

Dimensions in inches and (millimeters)
- 358 -
Version: B07
RS1A - RS1M
1.0 AMP. Surface Mount Fast Recovery Rectifiers
SMA/DO-214AC
Features
 For surface mounted application
 Glass passivated junction chip
 Built-in strain relief, ideal for automated
placement
 Plastic material used carries Underwriters
Laboratory Classification 94V-0
 Fast switching for high efficiency
 High temperature soldering:
260
o
C/ 10 seconds at terminals
Mechanical Data
 Cases: Molded plastic
 Terminals: Pure tin plated, Lead free.
 Polarity: Indicated by cathode band
 Packing: 12mm tape per EIA STD
RS-481
 Weight: 0.064 gram
Maximum Ratings and Electrical Characteristics
Rating at 25
o
C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number Symbol RS1A RS1B RS1D RS1G RS1J RS1K RS1M Units
Maximum Recurrent Peak Reverse Voltage V
RRM
50 100 200 400 600 800 1000 V
Maximum RMS Voltage V
RMS
35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage V
DC
50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified Current
See Fig. 1 @T
L
=90
o
C
I
(AV)
1.0 A
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load
(JEDEC method )
I
FSM
30 A
Maximum Instantaneous Forward Voltage
@ 1.0A
V
F
1.3 V
Maximum DC Reverse Current @ T
A
=25
o
C
at Rated DC Blocking Voltage @ T
A
=125
o
C
I
R
5
50
uA
uA
Maximum Reverse Recovery Time ( Note 1 ) Trr 150 250 500 nS
Typical Junction Capacitance ( Note 2 ) Cj 10 pF
Typical Thermal Resistance (Note 3) R
θJA
R
θJL
105
32
o
C /W
Operating Temperature Range T
J
-55 to +150
o
C
Storage Temperature Range TSTG -55 to +150
o
C
Notes:
1. Reverse Recovery Test Conditions: I
F =0.5A, I R =1.0A, I RR =0.25A
2. Measured at 1 MHz and Applied V
R =4.0 Volts
3. Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted on P.C.B.
with 0.2”x0.2” ( 5.0 x 5.0 mm ) Copper Pad Areas.