Datasheet

ManualsBrandsTAIWAN SEMICONDUCTOR ManualsVoltage RegulatorsVoltage Regulator

TS78L00 Series

3-Terminal 100mA Positive Voltage Regulator

1/12 Version: A07

TO-92

SOT-23

SOP-8

SOT-89

General Description

The TS78L00 Series of positive voltage Regulators are inexpensive, easy-to-use devices suitable for a multitude of

applications that require a regulated supply of up to 100mA. Like their higher power TS7800 and TS78M00 Series

cousins, these regulators feature internal current limiting and thermal shutdown making them remarkably rugged. No

external components are required with the TS78L00 devices in many applications.

These devices offer a substantial performance advantage over the traditional zener diode-resistor combination, as

output impedance and quiescent current are substantially reduced.

Features

● Output Voltage Range 3.3 to 24V

● Output current up to 100mA

● No external components required

● Internal thermal overload protection

● Internal short-circuit current limiting

● Output transistor safe-area compensation

● Output voltage offered in 4% tolerance

Ordering Information

Part No.

Package

Packing

TS78LxxCT B0

TO-92

1Kpcs / Bulk

TS78LxxCT A3

TO-92

2Kpcs/ Ammo

TS78LxxACY RM

SOT-89

1Kpcs / 7” Reel

TS78LxxCY RM

SOT-89

1Kpcs / 7” Reel

TS78LxxCS RL

SOP-8

2.5Kpcs / 13” Reel

TS78LxxCX RF

SOT-23

3Kpcs / 7” Reel

Note: Where xx denote voltage option

Standard Application Circuit

Absolute Maximum Rating (Ta = 25

C unless otherwise noted)

Parameter

Symbol

Limit

Unit

TS78L03

TS78L05 ~ TS78L18

DC Input Voltage

TS78L24

Power Dissipation

Internal Limited

Operating Junction Temperature

0 ~ +125

Storage Temperature Range

STG

-65~+150

A common ground is required between the input and the

output voltages. The input voltage must remain typically

2.0V above the output voltage even during the low point on

the Input ripple voltage.

XX = these two digits of the type number indicate voltage.

* = Cin is required if regulator is located an appreciable

distance from power supply filter.

** = Co is not needed for stability; however, it does improve

transient response.

Pin Definition:

1. Output

2. Ground

3. Input

Pin Definition:

1. Output

8. Input

2. Ground

7. Ground

3. Ground

6. Ground

4. N/C

5. N/C

Pin Definition:

1. Output

2. Input

3. Ground

Pin Definition:

TS78L00ACY

1. Output

2. Ground

3. Input

TS78L00CY

1. Input

2. Ground

3. Output

Summary of content (12 pages)

PAGE 1
TS78L00 Series 3-Terminal 100mA Positive Voltage Regulator TO-92 Pin Definition: 1. Output 2. Ground 3. Input SOT-23 Pin Definition: SOP-8 Pin Definition: 1. Output 8. Input 2. Ground 7. Ground 3. Ground 6. Ground 4. N/C 5. N/C 1. Output 2. Input 3. Ground SOT-89 Pin Definition: TS78L00ACY 1. Output 2. Ground 3. Input TS78L00CY 1. Input 2. Ground 3.
PAGE 2
TS78L00 Series 3-Terminal 100mA Positive Voltage Regulator TS78L03 Electrical Characteristics o o (Vin=8.3V, Iout=40mA, 0 C≤Tj≤125 C, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.) Parameter Symbol Test Condition Min Typ Max Tj=25 C 3.173 3.3 3.432 5.8V≤Vin≤20V, 5mA≤Iout≤100mA 3.142 3.3 3.465 -- 50 150 -- 15 100 5mA≤Iout≤40mA o Iout=0, Tj=25 C --- 5 3 50 6 --- --- 1.5 0.1 mA -41 40 49 --- µV dB --- 2 0.15 --- V A -- -0.
PAGE 3
TS78L00 Series 3-Terminal 100mA Positive Voltage Regulator TS78L06 Electrical Characteristics o o Vin=11V, Iout=40mA, 0 C≤Tj≤125 C, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.) Parameter Symbol Test Condition o Tj=25 C Output voltage Vout Line Regulation REGline Load Regulation REGload Quiescent Current Iq Quiescent Current Change ΔIq 8.5V≤Vin≤21V, 5mA≤Iout≤100mA 10.5V≤Vin≤21V o Tj=25 C Iout=40mA 5mA≤Iout≤100mA o Tj=25 C 5mA≤Iout≤40mA o Iout=0, Tj=25 C 10.
PAGE 4
TS78L00 Series 3-Terminal 100mA Positive Voltage Regulator TS78L09 Electrical Characteristics o o Vin=15V, Iout=40mA, 0 C≤Tj≤125 C, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.) Parameter Symbol Test Condition Min Typ Max 8.65 9 9.36 8.57 9 9.45 -- 90 180 --- 30 15 90 45 Iout=0, Tj=25 C 11V≤Vin≤23V --- 3 -- 6 1.5 mA 5mA≤Iout≤40mA o 10Hz≤f≤100KHz, Tj=25 C --- -60 0.1 -- µV 37 -- 57 1.7 --- dB V -- 0.15 -- A -- -0.
PAGE 5
TS78L00 Series 3-Terminal 100mA Positive Voltage Regulator TS78L15 Electrical Characteristics o o Vin=23V, Iout=40mA, 0 C≤Tj≤125 C, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.) Parameter Symbol Test Condition Min Typ Max Tj=25 C 14.42 15 15.60 17.5V≤Vin≤30V, 5mA≤Iout≤100mA 14.28 15 15.75 -- 150 30 -- 50 150 5mA≤Iout≤40mA o Iout=0, Tj=25 C --- 25 3 75 6.6 --- --- 1.5 0.1 mA -34 90 39 --- µV dB --- 1.7 0.15 --- V A -- -1.
PAGE 6
TS78L00 Series 3-Terminal 100mA Positive Voltage Regulator TS78L24 Electrical Characteristics o o Vin=33V, Iout=40mA, 0 C≤Tj≤125 C, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.) Parameter Symbol Test Condition Min Typ Max Tj=25 C 23.07 24 24.96 27V≤Vin≤38V, 5mA≤Iout≤100mA 22.85 24 25.20 -- 200 400 -- 80 240 5mA≤Iout≤40mA o Iout=0, Tj=25 C --- 40 4 120 7 --- --- 1.5 0.
PAGE 7
TS78L00 Series 3-Terminal 100mA Positive Voltage Regulator Application Information Design Considerations The TS78L00 Series of fixed voltage regulators are designed with Thermal Overload Protection that shuts down the circuit when subjected to an excessive power overload condition. Internal Short Circuit protection Limits the maximum current the circuit will pass. In many low current applications, compensation capacitors are not required.
PAGE 8
TS78L00 Series 3-Terminal 100mA Positive Voltage Regulator TO-92 Mechanical Drawing DIM A B C D E F G H TO-92 DIMENSION MILLIMETERS INCHES MIN MAX MIN MAX 4.30 4.70 0.169 0.185 4.30 4.70 0.169 0.185 14.30(typ) 0.563(typ) 0.43 0.49 0.017 0.019 2.19 2.81 0.086 0.111 3.30 3.70 0.130 0.146 2.42 2.66 0.095 0.105 0.37 0.43 0.015 0.017 Marking Diagram XX Y M L = Output Voltage (03=3.
PAGE 9
TS78L00 Series 3-Terminal 100mA Positive Voltage Regulator SOT-89 Mechanical Drawing DIM A B C D E F G H I J SOT-89 DIMENSION MILLIMETERS INCHES MIN MAX MIN MAX 4.40 4.60 0.173 0.181 1.50 1.7 0.059 0.070 2.30 2.60 0.090 0.102 0.40 0.52 0.016 0.020 1.50 1.50 0.059 0.059 3.00 3.00 0.118 0.118 0.89 1.20 0.035 0.047 4.05 4.25 0.159 0.167 1.4 1.6 0.055 0.068 0.35 0.44 0.014 0.017 Marking Diagram XX = Output Voltage (03=3.
PAGE 10
TS78L00 Series 3-Terminal 100mA Positive Voltage Regulator SOP-8 Mechanical Drawing DIM A B C D F G K M P R SOP-8 DIMENSION MILLIMETERS INCHES MIN MAX MIN MAX. 4.80 5.00 0.189 0.196 3.80 4.00 0.150 0.157 1.35 1.75 0.054 0.068 0.35 0.49 0.014 0.019 0.40 1.25 0.016 0.049 1.27BSC 0.05BSC 0.10 0.25 0.004 0.009 0º 7º 0º 7º 5.80 6.20 0.229 0.244 0.25 0.50 0.010 0.019 Marking Diagram XX Y M L = Output Voltage (03=3.
PAGE 11
TS78L00 Series 3-Terminal 100mA Positive Voltage Regulator SOT-23 Mechanical Drawing DIM A A1 B C D E F G H I J SOT-23 DIMENSION MILLIMETERS INCHES MIN MAX MIN MAX. 0.95 BSC 1.9 BSC 0.037 BSC 0.074 BSC 2.60 3.00 0.102 0.118 1.40 1.70 0.055 0.067 2.80 3.10 0.110 0.122 1.00 1.30 0.039 0.051 0.00 0.10 0.000 0.004 0.35 0.50 0.014 0.020 0.10 0.20 0.004 0.008 0.30 0.60 5º 10º 0.012 5º 0.024 10º Marking Diagram L3 = Device Voltage Code (L3=3.
PAGE 12
TS78L00 Series 3-Terminal 100mA Positive Voltage Regulator Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document.