User Manual

- 28 -
CL5ADAH2Z
Confidential
2020.11.05 rev.1.1
3.6. RF Antenna Interface
3.6.1. RF Connector location
This module does not include any antennas. External antennas need to be used for the final products
using this module.
NOTE
● You should prepare an external antenna which was certified based on the Radio Type
Approval of the module.
● Please optimize impedance matching between RF input/output line and antenna by using
a matching circuit.
The RF input/output line of characteristic impedance in the module is 50Ω.
● For recommended antennas, refer to the antenna list (See attachment).