User Manual

- 51 -
CL5ADAH2Z
Confidential
2020.11.05 rev.1.1
10.10. Emergency Call
This module functions through receiving and transmitting radio signals.
Therefore, the connection cannot be guaranteed in all conditions. In an emergency, module cannot be
used.
10.11. FCC & ISED Notice
Required End Product Labeling
Any device incorporating this module must include an external, visible, permanent marking or label
which states: “Contains FCC ID: RYYCL5AD” and “Contains IC: 4389B-CL5AD”
Obligation d'étiquetage du produit final:
Tout dispositif intégrant ce module doit comporter un externe, visible, marquage permanent
ou une étiquette qui dit: "Contient IC : 4389B-CL5AD”
Additional testing, Part 15 Subpart B disclaimer
The CL5ADAH2Z modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC
transmitter rules) listed on the grant, and that the host product manufacturer is responsible for compliance
to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification.
The final host product still requires Part 15 Subpart B compliance testing with the modular transmitter
installed.
FCC
This module has been tested and found to comply with the following requirements for Modular Approval.
 Part 22H – Cellular radiotelephone service
 Part 24E – Broadband PCS
 Part 27C – Technical standards
 Part 90S – Regulations governing licensing and use of frequencies in the 806-824, 851-869, 896-
901, and 935-940 MHz Bands, 851-869, 896-901, and 935-940 MHz Bands
 Part 2.1046 – Measurements required: RF power output