User Manual

6-Dec.-2008 Ver.0.5
TAIYO YUDEN Confidential
& Tentative
26/39
TAIYO YUDEN
EY
T
MECS
Control No.
HD-AE-D080137 (4/11)
Control name
Electrical characteristics
Table 7: Page procedures
Item Capability Status Support
1 Support paging M Yes
2 Support page scan M Yes
3
(Intentionally left blank)
No
4
(Intentionally left blank)
No
5 Supports Interlaced Scan during page scan O Yes
Table 8: Paging schemes
Item Capability Status Support
1 Supports mandatory scan mode M Yes
Table 9: Paging modes
Item Capability Status Support
1 Supports paging mode R0 C.1 Yes
2 Supports paging mode R1 C.1 Yes
3 Supports paging mode R2 C.1 Yes
C.1: At least one of the paging scan modes must be supported.
Table 9b: Paging train repetition
Item Capability Status Support
1 Supports Npage >= 1 O Yes
2 Supports Npage >= 128 O Yes
3 Supports Npage >= 256 M Yes
Note: The master should use Npage >= 256 unless it knows what SR mode the slave uses.
Table 10: Inquiry procedures
Item Capability Status Support
1 Support inquiry O Yes
2 Inquiry scan with first FHS O Yes
3
(Intentionally left blank)
No
4
(Intentionally left blank)
No
5 Supports the dedicated inquiry access code O Yes
6 Supports Interlaced Scan during inquiry scan O Yes
7
Extended Inquiry Response
O Yes
Table 11: Piconet capabilities
Item Capability Status Support
1 Broadcast messages O Yes
2 Point-to-multipoint connections O Yes
Table 12: Scatternet capabilities
Item Capability Status Support
1 Act as Master in one piconet and as Slave in another piconet O Yes
2 Act as Slave in more than one piconet O Yes
Table 13: Synchronous Coding Schemes
Prerequisite: 2/2 (SCO link support)
Item Capability Status Support
1 A-law O Yes
2 u-law O Yes
3 CVSD O Yes
4 Transparent Synchronous Data O Yes