User Manual

ManualsBrandsTAIYO YUDEN ManualsElectronicsComplete Class 2 Bluetooth Module

6-Dec.-2008 Ver.0.5

TAIYO YUDEN Confidential

& Tentative

32/39

TAIYO YUDEN

MECS

Control No.

HD-AE-D080137 (10/11)

Control name

Electrical characteristics

Table 20: Quality of Service

Item Capability Status Support

Channel quality driven change between DM and DH packet

types

C.1 Yes

2 Force/Request change of Quality of Service M Yes

3 Request change of Quality of Service M Yes

C.1: Mandatory IF support of (LMP:2/11) is stated in the feature request, ELSE Optional.

Table 21: SCO Links

Prerequisite: 2/12 (SCO links)

Item Capability Status Support

1 Initiate SCO links, as Master O Yes

2 Initiate SCO links, as Slave O Yes

3 Accept SCO links O Yes

4 Remove SCO links, as Master C.1 Yes

5 Remove SCO links, as Slave C.2 Yes

6 Negotiate SCO link parameters, as Master C.3 Yes

7 Negotiate SCO link parameters, as Slave C.4 Yes

C.1: Mandatory IF (LMP:21/1) - (Initiating SCO links, as Master) is supported, ELSE Optional.

C.2: Mandatory IF (LMP:21/2) - (Initiating SCO links, as Slave) is supported, ELSE Optional.

C.3: Mandatory IF (LMP:21/1) - (Initiating SCO links, as Master) OR (LMP:21/3) - (Accept SCO links) is supported, ELSE

Optional.

C.4: Mandatory IF (LMP:21/2) - (Initiating SCO links, as Slave) OR (LMP:21/3) - (Accept SCO links) is supported, ELSE

Optional.

Table 22: Multi-Slot packages

Item Capability Status Support

1 Accept maximum allowed number of slots to be used C.1 Yes

2 Request maximum number of slots to be used C.1 Yes

3 Accept request of maximum number of slots to be used C.1 Yes

C.1: Mandatory IF (LMP:2/1) AND/OR (LMP:2/2) is supported in the feature request, ELSE Optional.

Table 23: Paging scheme

Item Capability Status Support

1 Request page mode to use O Yes

2 Accept suggested page mode O Yes

3 Request page scan mode to use O Yes

4 Accept suggested page scan mode O Yes

Table 24: Connection Establishment

Item Capability Status Support

1 Create connection for higher layers M Yes

2 Respond to requests to establish connections for higher layers M Yes

3 Indicate that link set-up is completed M Yes

Table 25: Test Mode

Item Capability Status Support

1 Activate test mode O Yes

2 Ability to reject activation of test mode if test mode is disabled M Yes

3 Control test mode O Yes

Ability to reject test mode control commands if test mode is

disabled.

M Yes