User's Manual

English

3. How to Load the Batteries into the Transmitter

This transmitter uses a 006P-9V battery (option).

(1) Slide the battery cover forward until detached.

(2) Pay attention to the

and directions of the battery when inserting it.

(3) Reattach the battery cover in the opposite order from which it was detached.

4. How to Load the Batteries into the Charger (When D alkaline batteries are used)

This charger requires eight D alkaline batteries (option).

(1) Loosen the screws of the battery cover with a Philips screwdriver.

(2) Slide the battery cover until detached.

(3) Match the

and marks at both ends of each battery with the and marks in the battery case and insert the eight D

alkaline batteries.

(4) Reattach the battery cover in the original position and tighten the screws.

(1) (2) (3)

Note: Load the 006P-9V battery cor-

rectly, paying attention to the

and directions. See the figure

above.

* When the battery capacity of the transmitter becomes low, the power LED will be dark. Also, the distance that radio waves

reach becomes shorter. Replace the 9 V battery (Alkaline or Zinc) with a new one soon.

(1) (2) (3)

HELIO_En_p02_15.p65 4/9/04, 10:01 AM8