User's Manual

English

V How to Put the Battery Pack into the Airplane

(1) Open the battery pack compartment cover.

(2) Plug the battery pack connector into the connector in the battery pack compartment. Then, insert the battery pack into the

compartment, and close the cover.

WHERE TO FLY THE AIRPLANE

First, look for a good place for flying with the following features.

* A flat place that is at least 400 meters square with no ob-

stacles

* A wind velocity of 0 to 2 m per second is the best for

flying the plane. In these conditions, the transmitter rib-

bon will hang at an angle of 45° or less.

• An open area with good visibility and no obstacles

• The ground should be flat and there should not be any

rocks or bushes

• Little or no wind

0 m/second

(calm)

1 - 2 m/second

5 m/second

or more

The connector cannot be plugged in if the polarity and of the connector pins is reversed (the connector is keyed so that it

only goes in one way). Do not use force to plug in the connector. Check the orientation of the connector, and then plug it in.

Battery pack

compartment

cover

Be sure that the

power switch has

been turned off.

4.8V Ni-MH battery pack

(1) (2)

A408 8