User’s Manual TR3X-SD01-24-CS141 Manual No.
Introduction Thank you for purchasing a TR3X-SD01-24-CS141 RFID READER/WRITER. Be sure to read this manual before using the product. After reading it, store the manual in a convenient place for future reference. Manual No.
Regulations and Standards FCC This product is conform to the FCC standards. FCC Rules (Federal Communications Commission) This product complies with Part 15 Subpart B and C of the FCC Rules. FCC ID : MK4SD01-24-CS141 FCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Japan Radio Law Equipment using high frequencies: Inductive Reading/Writing Communications Equipment Conforming standards: Inductive Reading/Writing Communications Equipment; Standard: ARIB STD-T82 RoHS is support Restriction of Hazardous Substances Waste Dispose of the Products as industrial waste. Manual No.
Safety Precautions The following symbols are used in this manual to indicate precautions that must be observed to ensure safe use of this product. The precautions provided here contain important safety information. Be sure to observe these precautions. The following signal words are used in this manual. Failure to comply with a WARNING may result in serious injury or death. Failure to comply with a CAUTION may result in injury to the operator, or damage to the items involved.
Contents 1 Product Overview ...................................................................................................... 1 1.1 2 Names of Parts and Functions ..................................................................................... 2 2.1 2.2 3 Features .............................................................................................................................................. 1 TR3X-SD01-24-CS141 ...................................................................
1 Product Overview 1.1 Features 1 Product Overview 1.1 Features This product uses the 13.56MHz frequency. This product is the electromagnetic induction type non-contact IC can read and write RFID tag data. This Product is designed to be embedded and integrated within OEM devices and finished products such as label printers, cashless payment terminals or any other device that can benefit from integrated RFID capabilities.
2 Names of Parts and Functions 2.1 TR3X-SD01-24-CS141 2 Names of Parts and Functions 2.1 TR3X-SD01-24-CS141 ① ⑫ ③ ⑩ ⑪(Printing on the case) ④ ⑤ ⑥ ⑦ ⑧ ⑨ ② (Inside the case) ⑫ Manual No.
2 Names of Parts and Functions 2.1 TR3X-SD01-24-CS141 No ① Name LED to indicate the presence or absence of RF tag Feature Description Displays the status of 24 antennas. Lit: There is an RF tag on the antenna. Off: There is no RF tag on the antenna. ② Terminal block for checking radio wave condition It is a terminal block for checking the radio wave condition.
2 No ⑩ Name Serial number label Names of Parts and Functions 2.1 TR3X-SD01-24-CS141 Feature Description The serial number will be an 8-digit serial number. Model name serial number：******** 8-digit 2D barcode Contents: Model name / serial number ⑪ Printing on the case ⑫ Nameplate RFID sticker Screw holes ⑬ Silk print showing the model of this product, pin assignment of each connector, LED number, etc. Production numbers. Specify that the RFID radio waves are radiated. M4 holes. Manual No.
2 Names of Parts and Functions 2.2 TR3-CA065 (12) 2.2 TR3-CA065 (12) CA033 is combined by 2 loop sub antennas and a coupler board. ② ③ ① ④ ⑤ No ① ② ③ Name Mounting holes Antenna pattern Connector ④ Serial number label Feature Description M2 holes. An antenna that communicates with RF tags. Connect the antenna cable. Connector model number: U.FL-R-SMT-1 The serial number is an 8-digit serial number.
3 Setting and connection 3.1 Setting 3 Setting and connection This RFID Reader/Writer product is to be professionally installed by authorized, qualified and service-trained installation personnel only. 3.1 Setting 3.1.1 DeskTop Don’t drop the product. Injury may result if the product falls or is dropped. M4 Screw 3.1.2 Wall Mounting Must be fastened securely the product with the screws. Don’t install to the high place. Injury may result if the product falls or is dropped. M4 Screw Manual No.
3.2 3 Setting and connection Antenna installation into a host device 3.2 Antenna installation into a host device Incorporate the antenna in enclosure by all means. 3.2.1 Installation example by Screw holes ・TR3-CA065(12) M2 Screw Manual No.
3 Setting and connection 3.3 Connection 3.3 Connection This product will connect with the antenna. This product connects with Host Device with the cable. Type of ferrite core and number of turns are specified by compliance for FCC. When we offer this product, we also offer a ferrite core.When connecting to a host device, be sure to wrap the interface cable around the provided ferrite core as described in Section 3.3.2.
3 3.3.2 Setting and connection 3.3 Connection Direct connection to the Host Device Interface. Host Device TR3X-SD01-24-CS141 Ferrite core (5 turns) Host Device Interface Item Ferrite core Models MSFC13KEX Interface Cable ) Manufacturer MORIMIYA ELECTRIC CO., LTD. Manual No.
4.1 4 Specifications TR3X-SD01-24-CS141 4 Specifications 4.1 TR3X-SD01-24-CS141 Specification Item Conformity Japan Radio standard Law (※1) Radio Frequency Contents Standard number: ARIB STD-T82 Standard name: Inductive read / write communication equipment (Wireless card system, etc.
4.1 Specifications Item Anti-collision Parameter Standards ISO/IEC 15693 ISO/ISC 18000-3 (Mode1) Host Interface RS-232C Item Speed LED BUZZER Antenna Connector Anti-collision YES Parameter 9600bps 19200bps 38400bps(※2) 8 None 1 None Data bits Parity Stop bit Flow control Control 1 LED (green) 1 BUZZER Connector SMB(J)×24 Symbol RF GND Center Contact Shell Connector RS-232C Function RF output GND Connector D-SUB 9Pin Pin assignment Pin No.
4.1 Specification Radio Frequency Item Communication distance 4 Specifications TR3X-SD01-24-CS141 Contents Maximum: Approximately 4 mm (Ta = 25℃) This is a reference value when the antenna (TR3-CA065) is connected and the RF tag "ST-5.5X5.5BPET-NN" manufactured by Star Engineering is used. The communication distance varies depending on the surrounding metal, noise, power supply, temperature and other usage environment, antenna used, and tag used. Anti-collision Unsupported.
4.1 Specification Control Item Communication command Initialization time (When the power is turned on) Interface 4 Specifications TR3X-SD01-24-CS141 Contents Refer to "3.1.2 Communication Specifications" in this manual. Command processing is possible after 400 ms have passed since the power was turned on. The same applies after executing the restart command.
4.1 Specification Control Item Status display LED 4 Specifications TR3X-SD01-24-CS141 Contents No. Use Display color 1 Power ON / OFF Green 2 Communication status with the host device Orange 3 Presence or absence of RF tag Green Function Lit: Power on Off: Power off 1 each for sending and receiving Off: Standby (non-communication) Blinking: Communicating Antenna 24CH status display (24) Lit: with tag Off: No tag It has the following A.B. functions. A.
4.
4.1 Specification Item Mechanical Dimensions data (W x D x H) Weight Material Electrical data Contents 165(W) x 148.5(D) x 32.5(H)mm (Protrusions except) [Dimensional drawing] See below Approx. 352g Aluminum Name Material Top cover A5052 1.0t Anodic oxide coating Lower case A5052 1.0t Anodic oxide coating Base plate A5052 2.
4.1 4 Specifications TR3X-SD01-24-CS141 ■ Dimensions Unit: mm Dimensional tolerance: ± 1.5mm () Is a reference dimension Manual No.
4 Specifications 4.2 TR3-CA065(12) 4.2 TR3-CA065(12) ■ Specifications Specification Item Conformity RoHS standard Antenna Antenna resonance frequency Communication distance Contents Compliant with the EU RoHS (2002/95/EC) However, the 10 substances prohibited by (EU) 2015/863 are below the standard value. 13.56MHz ±0.5MHz[Ta=25℃ (※1)] 4mm or more ※1 [Conditions] RF tag: "ST-5.5X5.5BPET-NN" made by Star Engineering.
4 Specifications 4.2 TR3-CA065(12) ■ Dimensions Antenna number ⑫ ⑪ ⑩ ⑨ ⑧ ⑦ ⑥ ⑤ ④ ③ ② ① Unit: mm Board dimensional tolerance: ± 1.0 mm Board thickness: 1.0 mm ■ Connectable devices Product name RFID reader / writer unit Model number TR3X-SD01-24-CS141 Manual No.
5 Accessories 5.1 Ferrite Core 5 Accessories 5.1 Ferrite Core ■ Specifications Item Models Ferrite core MSFC13KEX Manufacturer MORIMIYA ELECTRIC CO., LTD. Manual No.
6 Maintenance This product is mainly used in electronic components and semiconductors. Therefore, the long-term stable operation, the environment and conditions are expected to defect, as shown below. • Device degradation due to overvoltage and overcurrent. • Device degradation due to high temperature and long-term stress. • Poor contact of the connector and cause deterioration of insulation by moisture or dust. • Connector corrosion by corrosive gases.
Revision History Revision code 1.00 Date 2022/02/22 Revised contents Original production Manual No.
[URL] [Mail] https://www.takaya.co.jp/ rfid@takaya.co.
