Operation Manual

62 63
3.2 Technical Specifications
Component Description
USB Port USB2.0 Full Speed
LCD 2.5 inch, 320 x 240 pixels TFT
Internal Memory 128MB
Memory Card MMC, SD
Video Format ASF
Audio Format MP3, WMA, WAV
Image Format JPEG
Bit Rate MP3: 32kbps – 320kbps; WMA: 32kbps – 160kbps
Recording Quality WAV: 8KHz, 32Kbps; MP3: 48KHz, 64Kbps
Language German, English
Recharge Time 3.5 hours
Recording Time Varies depending on the storage capacity
Battery Type Rechargeable Lithium-ion battery (3.7V, 850mAh)
Battery Life 3 hours
Signal Noise Ratio > 80dB
Frequency Response 20Hz – 20KHz
Operating Current <380mA
Storage Temperature -20ºC ~ +55ºC
Ambient Temperature 0ºC ~ +55ºC
Relative Humidity for Operation 20% ~ 93% (40ºC )
Relative Humidity for Storage 20% ~ 93% (40ºC )
Dimensions L x W x H: 103mm x 64mm x 20mm
Weight 81.3g
3.3 Important Notice
When you download files, you must copy videos/images to DCIM/100MEDIA, and copy audio
files to MP3. Otherwise, these files cannot be played or viewed. If you delete the “DCIM” or
“MP3” folder accidentally, please recreate it or restart the device.
For WMA track, ID3 information such as artist and album is not displayed. For MP3 tracks,
the ID3 information should be no longer than 15 characters.
For WMA tracks, please ensure that the bit rate is between 32kbps and 160kbps.
When the battery level is low, please ensure that you charge it promptly.
Make sure that videos or images are of a supported file type (ASF/JPEG). The Huffyuv codec is
not supported. If the files are not supported you will need to convert them unsing the Transcording
Tool included on the CineWalker file conversion software CD.
To ensure that your Line-in recordings are of high quality, keep audio sources from audio players
at a moderate volume.
The system clock will be reset after the battery is reinserted, so will need to be reset manually.
Ensure that the battery is sufficiently charged before formatting.
Chapter 3 Technical Support Chapter 3 Technical Support
Englisch