50 x 32 x 11 Weight 20 gr Screen Matrix (128*64) Liquid Crystal Connect to PC High Speed USB1.1 (Read 1000K Byte, Write800K Byte) Memory 1,2,4 GB Flash Power Supply Max 5 hours play mode Voice Recorder Sample rate Format Time 8KHz WAV (32K bps), ACT (8K bps) 35hours (ACT, 128M Flash) MP3 WMA WMV ASF Max. Output MP3 Bit rate Bit rate Freq.
User Manual
DiSPlAy BASic funcTionS » Access to menus Press Menu to access menus. » Scrolling Scroll music, menus, Fast Forward / Reverse » list of menus To access different menu functions from main menu. Battery level The player shows capacity on 9 levels Battery is full on 1.5V. As time goes on, capacity indication will vanish. Indicator shows blank when battery almost ran out. Now you should charge your battery. Please switch on the player before charging.
Volume Adjust Push VOL to access volume adjust, press Next/Last to increase or decrease volume. Switch on/off (Power switch (right side) must be in “On” Position) Press and hold play to switch on when the player is off. Press and hold play to switch off when the player is on. 5. Next: Next, FF, Volume increase 6. Last: Previous, Rev, Volume decrease 7. USB: USB outlet 8. ON/OFF: Power switch 9. Earphone: Standard earphone outlet Start / Stop recording On recording mode, press Play to stop.
Next: Next music. Volume adjustments: Press VOL to change volume, press Next to increase, last to decrease. Equalizer Mode 1. When playing music 2. Press Menu to enter the submenu Play 3. Push Next to choose the Equalizer Mode 4. Press Menu to enter the ‘Equalizer Mode’ submenu Select an equalizer: 5. Details of each equalizer (EQ): Natural, Rock, Pop, Classical, Soft, Jazz, DBB 6. Push Next to select an EQ and press Menu to confirm. Synchronous Lyric Display The player supports lyric files with *.
2. Press and hold Menu to enter the lyric interface; 3. Lyric is displayed 4. Press Menu return to the music mode. Voice Recording Please make sure that the battery has enough capacity before you start recording. Each folder can save up to 99 voice recording files. Record using the “Record mode” 1. .Enter the main menu: 4. Press Play to start recording.
Select Record Type 1. When the interface ‘Record stop’ is selected 2. Press Menu to enter the submenu Record 3. Push next to scroll to the submenu ‘Record type’ then press Menu to select it. 6. Volume control Push VOL to access volume adjustment, press Next/Last to increase or decrease the volume. Fine record Long-time record Fine voice control Long-time voice control The ACT file which produced by this player can be converted into WAV format by using the provided software.
2. Select the ACT files which you would like to convert. PS: This tool can also play WAV and MP3 files. Settings Entering Settings Using this option, you can set system performances, the options may vary for the different firmware version. 1. Enter the main menu 2. Push Next in order to scrolling to “Settings” 3. Press Menu to enter the settings. 3. Click on the ‘CONVERT’ button, the program will start converting the files.
Options introduction: (Recording Time) List of menus: ’Recording time’ setting Setting date / time when saving recorded file (Screensaver) Screensaver setting (Language) Choosing languages (Timing shut off) (Repeat Setting) Setting a countdown time in minutes, the player will shut off when time is out.
“Screensaver” Setting 1. Press Menu to enter the screensaver setting; will shut down automatically when the player becomes idle (regardless of its current status) for the period you have set. Thsi is designed for listening music before sleeping. Please note: The sleep mode can only be activated once after setting, you have to set again if you want to use it next time. ’Repeat Settings’ Please consult the paragraph ‘Sound Setting’ 2. Push Next to select the setting (Last for the previous setting) 3.
’Memory status’ You can check the total memory space and the percentage which is being used. ’Firmware version’ You can find the player’s firmware’s version. ’Firmware upgrade’ Use to upgrade player’s firmware. Tips: When pressing Play you can quickly exit the current menu. This function is working on all menus. Reading Documents In the main menu, press Next/Last to choose e-Document, press Menu to enter the corresponding submenu: Select Folder: Select the root directory of flash drive.
Create and Edit Telephone Book File Push NEXT to select the Browse TEL function. Press MENU to enter the Telephone book. Creating a Telephone Book file Push NEXT to scroll to the object you need to refer to, then press MENU to exit. The Telephone Book file can be created using the provided software tools Browse TEL: Check the contact which you have imported, including Name, E-mail, Mobile, QQ, Telephone, Fax etc. (This function is only available when the Telephone book had been stored.
2. Input information into the dialog box, then click ‘ADD’, a new contact will be created. Editing the Telephone Book file If you need to change contact details, you can do it as follows: 1.Click on the column where the contact is stored which you need to change, then you will see the details of the corresponding contact: 3. Click on ‘SAVE’, a file named ‘TELBOOK’ will be created on the player. The Telephone Book file will be created.
2. After editing, click on ‘increase’, you will receive a reminder: » Create Telbook.bin by using the provided Tel. book editor Telbook.exe » Connect the player with the USB cable, copy telbook. bin to the root directory of MP3 player. » Switch the player on and enter the ‘Import Tel file’ » Import telbook.bin to player Export Telephone Book: This function allows you to export Telephone Book file and then you can edit it on PC: 3. Click on confirm edit, you will find 2 records of the same person.
To enter, when on waiting mode’ press Menu to return to main menu and choose the operation you need. This player supports the Suspend mode. When connected to PC, the player works in the following three modes: 1. Waiting 2. Downloading 3. Uploading Upgrading your player You can use the PC software to maintain or upgrade the player’s firmware. 1. Enter the main menu 2. Push Next to scroll to the ‘Settings’ 3. Push Menu to enter the ‘Settings’ submenu. 4.
7. Select a firmware file. (It is stored on the provided CDROM or can be downloaded from the Internet) 8. Click on ‘Start Upgrade’, the upgrade will be performed. 9.
Other settings 3. Press Menu to enter the folder choosing interface Choosing another folder (Stop submenu) You can classify files into several different folders that simplifies to manage them (you should create the folders on the PC). The player can identify 9 folders in its root. 1. When stopped 4. Press Next or Last to choose a folder 5. Press Menu to entry the selected folder 2.
1. When stopped 4. Press Menu to enter delete interface 5.Push Next to choose “YES“ 2. Press Menu to enter the Stop submenu 6. Press Menu to confirm delete 3. Press Next or Last to choose ‘Delete file’ or ‘Delete all’ ‘Delete all’ will delete all files in current folder of current mode. I.e. Choose ‘Delete all’ in Music mode will delete all music files; recorder files will not be affected.
Play mode (Play submenu) You can choose different play mode (i.e. repeat, shuffle) when playing music or recording files.
In repeat mode, you can press VOL+ or VOL- to adjust the playing speed. Repeat interval determines the period of time between previous repetitions (in seconds). Contrast Function (No such Function in the playing mode) Troubleshooting 1. While entering the contrast function, the repeat icon will be displayed as , the original sound will be played.