User's Manual

8
2. There are two ways to register the watch. Either by
scanning its QR code or by manually entering its CID:
 To scan the QR code: Tap the middle of the screen to
start the camera (allow using the camera if asked). Now
scan the QR code that is on the back of your watch or on
the outside of its packaging. Move the QR code towards
or away from the phone until it is read automatically.
To enter the CID number: Tap enter CID, type in the CID
number and then tap OK. ( you can also see CID on
watch , Slide from top to bottom on the watch,then slide
from left to right,touch the to show the QR code of
the watch.
3.On the next screen, select the female/male/type
4.Enter the name of watch wearer and phone number on
the SIM Card that you will insert into the watch. Tap next.
5.Select your relation to the user. Tap done.
Note: the user who first links its phone to the watch will
become the administrator of that watch. This can be
changed later.
4.4Main functions
The following section is a brief description for mobile APP.
4.4.1Map screen
The Map screen shows the location of the linked watchs on
the map as well as provides ways of communication
between the app and any of those watchs.