User Manual

USB cable

USB cable connection

Ⅰ USB Data Cable Connection

Reminder: The required PC control software and product manual are saved in the attached CD.

Device

EX-3

■ PC Software

Ⅱ Steps of USB Cable Connection :

1. Click and install the PC control software. Press

"Next" according to the default prompts until

the software is successfully installed and then

press "Finish" to exit.

2. Connect the computer to the main unit with a

USB data cable, and turn on the power of the

main unit. The computer will automatically

find the new hardware and prompt that the

hardware is installed and ready for use.

3. When you open the PC control software, it will

automatically search for the USB and connect

to the main unit. After connection, the

connection button in the upper right corner

will turn green and display "Connected",

indicating that the software and the main unit

have been successfully connected. Now you

can operate the main unit through the

software. When exiting, click the "Connected"

button first, and then close the software

interface window.

Multifunctional Digital Power Amplifier