User Manual

5
7
6
4
1
2
3
EX-3
1. Independent processing of the PEQ parameters of echo and reverb: Adjust the frequency
and gain parameters by dragging the frequency point (small dot). Click "Show all EQ
parameters" to display the frequency, gain, and bandwidth parameters of all PEQ points,
and click "EQ reset" to restore all PEQ parameters to factory default.
2. The display area of PEQ parameters: You can manually input data to change the frequency,
Q value and gain of the corresponding frequency point. Filter types (low shelf, high shelf,
low cut, high cut) and bypass function keys are available.
3. The PEQ parameter slider can change the currently selected PEQ parameters (frequency,
bandwidth, gain).
4. There are mono and stereo options for echo. Mono and stereo are two different echo
effects. In the mono state, only one delay and one repetition parameter can be adjusted; in
the stereo state, the left and right delay and repetition parameters can be adjusted
separately, so is the pre-delay of echo.
5. The volume, time, pre-delay, space, high cut and low cut of the reverb can be adjusted.
6. The direct sound parameters of the effect can be adjusted.
7. The total effect volume can be controlled.
28
Multifunctional Digital Power Amplifier
Ⅳ Effect Processing Interface