User Manual

Ⅴ Center Output Interface

3 4

6 7

EX-3

1. The adjustment area of PEQ curve: Adjust the frequency and gain parameters by dragging

the frequency point (small dot). Click "Show all EQ parameters" to display the frequency,

gain, and bandwidth parameters of all PEQ points, and click "EQ reset" to restore all PEQ

parameters to factory default.

2. The display area of PEQ parameters: You can manually input data to change the frequency,

Q value and gain of the corresponding frequency point. Filter types (low shelf, high shelf,

low cut, high cut) and bypass function keys are available.

3. The PEQ parameter slider can change the currently selected PEQ parameters (frequency,

bandwidth, gain).

4. The low-cut frequency and slope of the center output are adjustable, and there is a bypass

function key.

5. The center delay is adjusted in the range of 0-100ms.6. The threshold value of the

compressor is adjustable. Click the "Set" button to set the ratio, start time and recovery

time.

7. The volume of the center output is independently controllable, so are the phase and mute

functions.

Multifunctional Digital Power Amplifier