User Manual

4 5 63 7 8

EX-3

1. The adjustment area of PEQ curve: Adjust the frequency and gain parameters by dragging

the frequency point (small dot), and change the frequency of the low cut point by dragging

the small square. Click "Show all EQ parameters" to display the frequency, gain, and

bandwidth parameters of all PEQ points, and click "EQ reset" to restore all PEQ parameters

to factory default.

2. The display area of PEQ parameters: You can manually input data to change the frequency,

Q value and gain of the corresponding frequency point. Filter types (low shelf, high shelf,

low cut, high cut) and bypass function keys are available.

3. The PEQ parameter slider can change the currently selected PEQ parameters (frequency,

bandwidth, gain).

4. The low-cut frequency of the subwoofer can be adjusted in the range of 20Hz-500Hz. Low-

cut filter types include BUTTERWORTH -6--24dB/BESSEL-6dB--24dB/LINK-12dB--24dB, and

there is a bypass function key.

5. The high-cut frequency of the subwoofer can be adjusted in the range of 20Hz-500Hz.

High-cut filter types include BUTTERWORTH-6dB--24dB /BESSEL-6dB--24dB/LINK-12dB--

24dB.

6. The delay parameter of the subwoofer output can be adjusted separately in the range of 0-

100ms.

7. The threshold value of the compressor is adjustable. Click the "Set" button to set the ratio,

start time and recovery time.

8. The volume of the bass output is independently controllable, so are the phase and mute

functions.

Multifunctional Digital Power Amplifier

Ⅵ Bass Output Processing Interface