User's Manual

AS-1 WRITER User Manual Rev.1.0 6 / 8
Rev.1.0
TAKUMA SEIKO CO., LTD
6 Operation
Write operation:
- Turn on the power.
- Put AS-1 WRITER above the ID tag you want to write.
- Set R/W switch to WRITE side.
- Press the CLEAR, UP, X10, DOWN button and select the number you want to
write ID address number.
CLEAR : ID write address to “000”.
UP : ID write address to 1 increase.
DOWN : ID write address to 1 decrease.
X10 : Hold down this button and press UP button then ID write
address to 10 increase. (DOWN is 10 decrease)
- Confirm WrADRS: xxx “OK” display by EXE button.
If writing was succeeded, EXE LED will light 100msec.
If writing was failed, LCD display will present Wr ADRS:xxx “NG” .
― ― ― Write mode ― ― ―
Wr ADRS: xxx